[B58josue]

Year: 2020
AWD
Mods: Fully stock
93 oct
Tune/Tuner (OTS or Custom tune). No tune

[Mark3380]

2022 Xdrive, Bone Stock at 4000 miles
Factory staggered 19" PS4S

[B58josue]

Year: 2020 M340ix
AWD
Mods: MST Intake, Bimmer network catless downpipe, and visconti flex fuel sensor
~E45
Tune/Tuner (OTS or Custom tune) Stage 2 Tune. Visconti flex fuel. On conservative tq map
On square setup 225/40/19 run flats

[Panscan340]

Originally Posted by B58josue

Year: 2020 M340ix
AWD
Mods: MST Intake, Bimmer network catless downpipe, and visconti flex fuel sensor
~E45
Tune/Tuner (OTS or Custom tune) Stage 2 Tune. Visconti flex fuel. On conservative tq map
On square setup 225/40/19 run flats

0-60 is wild , car seems extremely fast relative to mods

[B58josue]

Originally Posted by Panscan340

0-60 is wild , car seems extremely fast relative to mods

Xdrive helps out alot😅If i run my map 3 i just spin through first

[xnick101]

Originally Posted by Panscan340

0-60 is wild , car seems extremely fast relative to mods

-2000DA. That's the real reason haha.

[B58josue]

Originally Posted by xnick101

-2000DA. That's the real reason haha.

That too😂

[Anotherg20]

Wanted to share some data. This is a 2020 M340i xdrive full weight

Currently chasing the stock turbo record on 10.63 1/4 mile for the m340i so decided to collect some dragy in the street. The 1/4 mile dragy car was launch in 1st gear which affected my 60ft because of the short gear. After playing a bit with xHP and reaching out to them we were able to fit my 2nd gear launch . For some reach throttle body was closing for .5 sec bugging the launch.

Car is currently running a base map OTS from Chris Kaganader Tuning aka Kagantuned and mods are listed below

Pass was on e70 on the street
RK front mount intake/ VRSF downpipe/ Visconti reflex with boost logic PI 1050cc

Will be testing the 2nd gear launch soon at 1/4 mile .

[Anotherg20]

I also want to share my best pass with my RWD 2020 M340i

All these dragy were done at West Palm Beach International Raceway . The slope on the dragy seems to be inaccurate maybe because of the hard launch 😁
Mods are listed in one of the dragy by basically once again Kagantuned with his magic on both of my M340i . Never had any issues on my RWD m340 in the 3 years of ownership.

As you can see car was very consistent too 💪

[xnick101]

Movin!!! Hoping to see if you can snag that stock turbo 1/4 mile record soon!

[siphor1989]

Year: 2020
AWD
Mods: None
91 oct
Tune/Tuner (OTS or Custom tune). No tune


I know in C&D's review they were able to get 3.8s /w 1ft roll-out 0-60 so I wasn't expecting anything below 4s tbh. Still need to find a place to do a proper 1/4 mile run. Can't wait to start modding this thing!

[NOLABMW]

2023 bmw m340 with only a bms intake and jb4 tune
Was on map 3 with a e30 blend.
Ran a 11.86

[TheM340]

Originally Posted by Anotherg20

I also want to share my best pass with my RWD 2020 M340i

All these dragy were done at West Palm Beach International Raceway . The slope on the dragy seems to be inaccurate maybe because of the hard launch 😁
Mods are listed in one of the dragy by basically once again Kagantuned with his magic on both of my M340i . Never had any issues on my RWD m340 in the 3 years of ownership.

As you can see car was very consistent too 💪

Are you running meth yet I think with meth you can turn that 10.8 into a 9 second m340

[rmedina]

Originally Posted by NOLABMW

2023 bmw m340 with only a bms intake and jb4 tune
Was on map 3 with a e30 blend.
Ran a 11.86

I like your entry number

[TheM340]

Where can I post my logs to have them reviewed

[xnick101]

Originally Posted by TheM340

Where can I post my logs to have them reviewed

datazap.me

[Planoser]

Originally Posted by Anotherg20

I also want to share my best pass with my RWD 2020 M340i

What tires are you running and launch method?
I am also RWD and experiencing challenges with launch.

[xnick101]

Originally Posted by Planoser

What tires are you running and launch method?
I am also RWD and experiencing challenges with launch.

For launching RWD cars you need to get a custom tune where the tuner can really dial in boost and timing together in 1st or 2nd gear to help you hook up. They will have to ramp it in softly so it doesn't blow the tires off. MT ET SS or Nitto NT555R2 both work well on the street.

[Planoser]

Originally Posted by xnick101

For launching RWD cars you need to get a custom tune where the tuner can really dial in boost and timing together in 1st or 2nd gear to help you hook up. They will have to ramp it in softly so it doesn't blow the tires off. MT ET SS or Nitto NT555R2 both work well on the street.

Thanks , what suggestions or tips would you have for approach to launch ? Use launch control ? Or turn traction/esc all the way off by holding the button down? Brake torque to what rpm, etc?

[xnick101]

Originally Posted by Planoser

Thanks , what suggestions or tips would you have for approach to launch ? Use launch control ? Or turn traction/esc all the way off by holding the button down? Brake torque to what rpm, etc?

You have to just play with it to learn your car. I have a custom traction map set up on ecutek. So I click the traction button once, and then hold RPMs at 2000 rpm and I can hook and go with no issues. The DME uses wheel speed to control boost/torque as I launch. I have just Michelin PS4s on my daily tires and I have no issues. I have a drag pack when I go to the track that uses Nitto NT555R2's as well. I only turn DSC completely off at the track. On the street, it just goes straight into a burnout in second gear when the torque hits.

[Planoser]

Nice, thanks for the insight - what kind of 60ft are you running on the street and then also at the track with your drag pack?

[xnick101]

Originally Posted by Planoser

Nice, thanks for the insight - what kind of 60ft are you running on the street and then also at the track with your drag pack?

1.8-1.9 60 ft on the street and 3.5 second 0-60 on Michelin's. I never bothered to try the Nitto's on the street for launching but it would probably hook much better at a higher launch rpm. At the track with the Nitto's it does 1.6-1.7. You can do a 1.5 60 ft's easily on Mickey Thompson ET R's. Those are much better of a track tire but I have to drive two hours each way to the track so I prefer the Nitto's.