[andy5468]

Can someone tell me which number sub module number I can find the auto steering wheel heat settings below using Bimmercode?

I know it is in BDC module somewhere but could not locate the sub module number. Thanks

LHZ_CCM_IKF > aktiv
IKF_ENABLE: ikf_alle_sitze

[andy5468]

I have managed to find them after much searching.

For anyone else who is struggling to locate like me, they are in the following submodule numbers.

Headunit - MGU
3000 HMI SPEECH > AKT_Auto_Lenkradheizung > aktiv

then also

Body Domain Controller - BDC
3142 PfLinLRE > LHZ_ CCM_IKF > aktiv
3450 Others 1 > IKF_ENABLE: ikf_alle_sitze

[rickkap]

Your a star.... thank you!!!

Now i've just got to work out how to get lane assist working again... i'm turning off OTA...

[andy5468]

Originally Posted by rickkap

Your a star.... thank you!!!

Now i've just got to work out how to get lane assist working again... i'm turning off OTA...

and I am also trying to get the lane change assist working,
I have the below, but as with the steering wheel heat, I am struggling to locate the sub module numbers within Instrument cluster DKOMBI to code these in with my Bimmercode.

CB_FZG_UMGEBUNG_FAS: aktiv (01)
CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv (01)
PIA_FZG_UMGEBUNG_FAS: aktiv (01)
SICHT_ABSICHT_ENABLE: aktiv (01)

[andy5468]

Originally Posted by rickkap

Your a star.... thank you!!!

Now i've just got to work out how to get lane assist working again... i'm turning off OTA...

I have now located the driver assist coding options below within DKOMBI, but all I get is a black screen in the centre of the instrument cluster after enabling all four. Am I missing something?

3000 CB_FZG_UMGEBUNG_FAS: aktiv (01)
3000 CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv (01)
3007 PIA_FZG_UMGEBUNG_FAS: aktiv (01)
3000 SICHT_ABSICHT_ENABLE: aktiv (01)

[rickkap]

I was under the impression that these needed to be located and changed:

BDC_Body3 > CAFD_7083 > SPURWECHSEL_ASSISTENT
Default: nicht_activ
Change to: activ

HU_MGU > CAFD_3E52 > SPURWECHSELASSISTENT
Default: nicht_activ
Change to: gen_1

SAS2 > CAFD_42C1 > C_SWA_VORHANDEN
Default: Nr000_nicht_vorhanden
Change to: NR001_VORHANDEN

[andy5468]

Originally Posted by rickkap

I was under the impression that these needed to be located and changed:

BDC_Body3 > CAFD_7083 > SPURWECHSEL_ASSISTENT
Default: nicht_activ
Change to: activ

HU_MGU > CAFD_3E52 > SPURWECHSELASSISTENT
Default: nicht_activ
Change to: gen_1

SAS2 > CAFD_42C1 > C_SWA_VORHANDEN
Default: Nr000_nicht_vorhanden
Change to: NR001_VORHANDEN

Sorry, I misread your last message. I am coding "driver assistant view", not lane change assist. I understand these are two different things and have read that I cannot enable lane change assist in my car without the correct modules installed. Correct me if I am wrong.

[Eyeball]

Originally Posted by andy5468

I have managed to find them after much searching.

For anyone else who is struggling to locate like me, they are in the following submodule numbers.

Headunit - MGU
3000 HMI SPEECH > AKT_Auto_Lenkradheizung > aktiv

then also

Body Domain Controller - BDC
3142 PfLinLRE > LHZ_ CCM_IKF > aktiv
3450 Others 1 > IKF_ENABLE: ikf_alle_sitze

Do all the g20 have heated steering available

[andy5468]

Heated steering wheel is part of the optional extra "comfort pack" on my car.

Button on steering wheel to activate or as I have now coded mine to, it automatically comes on now along with my heated seat, when the outside temp drops below 10 degrees Celsius.