[dr_frankfurter]

It looks like they finally got around to making/releasing front splitters for the non M-sport 330i, aside from that one I've seen for $400-something. Found this on eBay...
https://www.ebay.com/itm/304150607728
Thoughts? I've bought my rear spoiler from this company and have nothing but good things to say about the quality and how well it's held up. To me it almost looks a little out of place on the stock front end, but what do you guys think? My car is black so it should blend in better.

[e90dude1]

I prefer the OEM M-sport front spoiler, less obvious and integrates better with the front bumper. IMHO

[dr_frankfurter]

Originally Posted by e90dude1

I prefer the OEM M-sport front spoiler, less obvious and integrates better with the front bumper. IMHO

Is that an option for the sport line bumper? I thought the OEM wasn't compatible with the non M-sport front end

[BIMthereRunFlat]

Does look a bit Viper ACR-ish, which if it enables the lap times that car's capable of, what the heck. Nothing else out there a bit better integrated?

[dr_frankfurter]

Originally Posted by BIMthereRunFlat

Does look a bit Viper ACR-ish, which if it enables the lap times that car's capable of, what the heck. Nothing else out there a bit better integrated?

I pulled the trigger and ordered it. I haven't seen anything else, at least not in this price range. I'll have to wait and see what it looks like in person. Hopefully it shaves a solid 5 minutes off my lap time.

[bxnardb]

Any updates on the look? dr_frankfurter

[dr_frankfurter]

Originally Posted by bxnardb

Any updates on the look? dr_frankfurter

https://g20.bimmerpost.com/forums/sh...php?p=28114772
It looked great, until it flew off in the freeway

[Arbitration]

Originally Posted by dr_frankfurter

https://g20.bimmerpost.com/forums/sh...php?p=28114772
It looked great, until it flew off in the freeway

Originally Posted by dr_frankfurter

https://g20.bimmerpost.com/forums/sh...php?p=28114772
It looked great, until it flew off in the freeway

Really flew off on the highway? Are you planning on replacing it with a different one that might hold stronger?

[dr_frankfurter]

Arbitration Yup; came right off, went under my wheels and flew towards the wall on the left lane. Way too far gone to get it back. I can't seem to find any other splitter besides this same one. I contacted the seller and they offered 10% off if I buy another one. Would rather save the headache and hassle of installing it again and just buy the JB+ that's been sitting in my cart for months.

[aguycalleddb]

Maxton Design do a full kit for the non m-sports now

https://www.maxtondesign.co.uk/body-...w-g20-standard

[dr_frankfurter]

Originally Posted by aguycalleddb

Maxton Design do a full kit for the non m-sports now

https://www.maxtondesign.co.uk/body-...w-g20-standard

Looks great! Unfortunately the delivery date to get this here in the States is February.

[aguycalleddb]

Originally Posted by dr_frankfurter

Looks great! Unfortunately the delivery date to get this here in the States is February.

Ah, I didn't realise it wasn't available in the US yet

[jmendo33]

Hi, hopefully you can help. I have already bought a different one not realizing that the fit was not for my 330i. The listing I bought did say it fit my car and once I got it found out that was not the case. Do you know if this one will fit the 21 330's? I know it says 19-21 however the compatibility at the bottom does not have 21. Thanks is advance
~ Mendo

[kail_g20]

Originally Posted by dr_frankfurter

It looks like they finally got around to making/releasing front splitters for the non M-sport 330i, aside from that one I've seen for $400-something. Found this on eBay...
https://www.ebay.com/itm/304150607728
Thoughts? I've bought my rear spoiler from this company and have nothing but good things to say about the quality and how well it's held up. To me it almost looks a little out of place on the stock front end, but what do you guys think? My car is black so it should blend in better.

It says it’s for sport bumper. Is the sport line bumper the same as the base model bumper. Or is it different and will it fit?