04-08-2024, 08:56 AM | #1 |
Cole
0
Rep 12
Posts |
DRL install issue
Hello, I installed a set of yellow DRLs from Bimmerplug, and once installed my turn signals are just perpetually on. One of my LEDs for the side parking lights burnt out as well, and bimmerplug replaced that one module and told me it would fix the signals being on as well but it did not. Has anyone else had this issue or know how to fix this? I also occasionally get a DRL/Parking lamp error on my idrive when i open bimmercode but the error goes away and never lets me read it when i scan for codes. Do i need to replace all 4 DRL modules to fix this? Any information will be helpful. Thanks.
https://lh3.googleusercontent.com/pw...-gm?authuser=0 https://lh3.googleusercontent.com/pw...-gm?authuser=0 https://lh3.googleusercontent.com/pw...-gm?authuser=0 |
04-09-2024, 03:21 AM | #2 |
B58 Power
496
Rep 630
Posts
Drives: 05/2022 M340i xDrive Touring
Join Date: Feb 2018
Location: Germany
|
First, do NOT buy anything from bimmerplug.
They´re just dropshipping cheap chinese parts that you can buy yourself on Ali Express. Second, the DRL modules in each headlight are directly connected. If one module fails, the other gets harmed as well. So you always need to replace both modules to be sure you wont destroy another module. It seems to be an error with the latest units, that the turn signals are permanently on. Get in touch with bimmerplug and let them replace the units until you receive some that don´t have the turn signal permanently on.
__________________
05/2022: BMW G21 ///M340i xDrive Touring - Individual Verde Ermes
|
Appreciate
1
ColeVanD0.00 |
Post Reply |
Bookmarks |
|
|