BMW genuine wheel arch expander for G20

Steve_Jr · 08-17-2023, 03:15 AM

Interest item from M240i, BMW launched wheel arch expander for M240i who want to use high offset wheel like 893M... trying to adapt it to M340i, completely compatible !! M3 genuine wheel .... of course

Rear one will be on next week

Jamaicalandwelove · 08-17-2023, 09:38 AM

Quote:

Originally Posted by Steve_Jr

Interest item from M240i, BMW launched wheel arch expander for M240i who want to use high offset wheel like 893M... trying to adapt it to M340i, completely compatible !! M3 genuine wheel .... of course

Rear one will be on next week

Looks great what is the process and I notice you have parking sensors. Did the extenders have the hole in them or you had to put 1 in???

1QuikWS6 · 08-17-2023, 02:34 PM

Quote:

Originally Posted by Jamaicalandwelove

Looks great what is the process and I notice you have parking sensors. Did the extenders have the hole in them or you had to put 1 in???

As per installed Pic #7 the extender portion for the front bumper stops short of the sensor so no need to drill anything

1QuikWS6 · 08-17-2023, 02:40 PM

NICE!

Wish there was something like this for the F32 - looking to get APEX VS-5RS staggered wheels using 245/35-19 front/275/30-19 rear but Apex states will prolly rub & must roll fenders

current offsets are 19x8.5 et 35/19x9.5 et 40 which puts those tires flush to my fenders with no rub/ Apex wheels will move combo out by 5mm

Jamaicalandwelove · 08-17-2023, 07:55 PM

Quote:

Originally Posted by 1QuikWS6

As per installed Pic #7 the extender portion for the front bumper stops short of the sensor so no need to drill anything

I see that you are based in Europe and I am trying to find them for the American market and no luck finding them can you tell me where you got it?

helmet91 · 08-18-2023, 03:13 AM

They should be available on the M240i with ZTK package it seems... Are they not available via the dealer parts desk?

Also, I'm not really seeing the point here. It's like like the actual fender is flared - all you're doing is adding a little extra width to the body to meet the regulations so that a wider wheel doesn't "stick out" too much. These aren't creating more room to stop rubbing, right?

I will say BMW did a better job that VWoA with the new Golf R and the goofy little plastic pieces they clipped to the fenders.

Paulskit · 08-18-2023, 07:05 AM

Doesn't 893M fit perfectly to G20 without any extenders?

AddictedTo///M · 08-19-2023, 11:03 AM

Looks great! Have you mounted the rear portion yet?

What front lip are you running? LCI?

Steve_Jr · 08-20-2023, 02:21 AM

You are right .. just widen fender no space for rubbling ... no matter what kind of space .... it's meaningful for widen looking ... Thanks.

Quote:

Originally Posted by helmet91

They should be available on the M240i with ZTK package it seems... Are they not available via the dealer parts desk?

Also, I'm not really seeing the point here. It's like like the actual fender is flared - all you're doing is adding a little extra width to the body to meet the regulations so that a wider wheel doesn't "stick out" too much. These aren't creating more room to stop rubbing, right?

I will say BMW did a better job that VWoA with the new Golf R and the goofy little plastic pieces they clipped to the fenders.

Steve_Jr · 08-20-2023, 02:23 AM

ordering and waiting ..... front lip from genuine LCI ...

Quote:

Originally Posted by AddictedTo///M

Looks great! Have you mounted the rear portion yet?

What front lip are you running? LCI?

Bee Pee · 08-21-2023, 02:30 AM

Quote:

Originally Posted by 1QuikWS6

NICE!

Wish there was something like this for the F32 - looking to get APEX VS-5RS staggered wheels using 245/35-19 front/275/30-19 rear but Apex states will prolly rub & must roll fenders

current offsets are 19x8.5 et 35/19x9.5 et 40 which puts those tires flush to my fenders with no rub/ Apex wheels will move combo out by 5mm

If the fender flat area width (where the mounts for the fender flares are installed) is the same for F and G series then there’s no reason why these g42 flares wouldn’t work on yr F32

Soslomode · 09-12-2023, 11:21 PM

Any pictures with the rear arch done?

siegester · 09-15-2023, 09:40 PM

I'd love to see the rears too! I just mounted some aggressive 295s on the rear and would love to add these for better aesthetics

Mikheil · 09-25-2023, 12:16 AM

Quote:

Originally Posted by Steve_Jr

Interest item from M240i, BMW launched wheel arch expander for M240i who want to use high offset wheel like 893M... trying to adapt it to M340i, completely compatible !! M3 genuine wheel .... of course

Rear one will be on next week

Hello, I saw the rear arch piece might not fit due to the edge of the rear passenger door limitation. So do you think it will fit perfectly?

Mikheil · 09-25-2023, 12:29 AM

Hi Steve, Im curious where did you get the carbon fender vent, could you share me the details please…?

Expert@ApexWheels · 09-26-2023, 06:09 PM

Quote:

Originally Posted by 1QuikWS6

NICE!

Wish there was something like this for the F32 - looking to get APEX VS-5RS staggered wheels using 245/35-19 front/275/30-19 rear but Apex states will prolly rub & must roll fenders

current offsets are 19x8.5 et 35/19x9.5 et 40 which puts those tires flush to my fenders with no rub/ Apex wheels will move combo out by 5mm

Important to note that even if there was something similar available for the F32, these don't change the inner dimensions of the wheelwell at all.

If a setup rubs the inside edge, adding external adhesive extensions doesn't change that. This applies to the G42 2 series ZTK fenders as well.

sorry to crush dreams

-Tom

Steve_Jr · 09-27-2023, 11:11 AM

Quote:

Originally Posted by Mikheil

Hello, I saw the rear arch piece might not fit due to the edge of the rear passenger door limitation. So do you think it will fit perfectly?

yes ... it doesn't fit perfectly but detour fiting lower to wheel a little .... please refer to attached photos

Steve_Jr · 09-27-2023, 11:12 AM

Quote:

Originally Posted by Soslomode

Any pictures with the rear arch done?

Please refer to attached photos

Steve_Jr · 09-27-2023, 11:13 AM

Quote:

Originally Posted by Mikheil

Hi Steve, Im curious where did you get the carbon fender vent, could you share me the details please…?

https://smartstore.naver.com/bimmerw...cts/5817403446

Bee Pee · 09-27-2023, 11:25 AM

Quote:

Originally Posted by Steve_Jr

Please refer to attached photos

Quote:

Originally Posted by Steve_Jr

yes ... it doesn't fit perfectly but detour fiting lower to wheel a little .... please refer to attached photos

Great work - tweak made is barely noticeable 👍

D0NVT · 04-30-2024, 11:50 AM

Good job!

slm266 · 05-01-2024, 07:45 AM

I know a guy who has G80 wheels: 19x9.5+20 + 20x10.5+20

He spent ~$1000 on fender cut+rolled+rewelded and then wrapped the car instead of repainting fenders

(Car is dirty from recent rain)

08-17-2023, 03:15 AM	#1
Steve_Jr Second Lieutenant 457 Rep 234 Posts Drives: M340i Join Date: Jan 2012 Location: Seoul iTrader: (0) Garage List 2014 BMW 428i [0.00]	BMW genuine wheel arch expander for G20 Interest item from M240i, BMW launched wheel arch expander for M240i who want to use high offset wheel like 893M... trying to adapt it to M340i, completely compatible !! M3 genuine wheel .... of course Rear one will be on next week Attached Images
	Appreciate 6 dhock_holiday216.50 Jamaicalandwelove15.00 larrylam646372.50 Bee Pee1783.50 CasualBimmer0.00 pdxdbo331.00 Tweet Quote

08-17-2023, 02:40 PM	#4
1QuikWS6 No 55mph 1622 Rep 8,476 Posts Drives: F32 435ix MSport Join Date: Jul 2009 Location: Blitzburgh, PA iTrader: (113) Garage List 2022 BMW M440ix Vert [0.00] 2015 BMW 435ix MSport [0.00] 2000 Pontiac Trans Am [0.00]	NICE! Wish there was something like this for the F32 - looking to get APEX VS-5RS staggered wheels using 245/35-19 front/275/30-19 rear but Apex states will prolly rub & must roll fenders current offsets are 19x8.5 et 35/19x9.5 et 40 which puts those tires flush to my fenders with no rub/ Apex wheels will move combo out by 5mm __________________ F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
	Appreciate 0 Quote

08-18-2023, 03:13 AM	#6
helmet91 Lieutenant 302 Rep 565 Posts Drives: BMW G20 330i X-Drive M-Sport Join Date: May 2020 Location: NL iTrader: (1) Garage List 2019 (G20) BMW 330i ... [10.00]	They should be available on the M240i with ZTK package it seems... Are they not available via the dealer parts desk? Also, I'm not really seeing the point here. It's like like the actual fender is flared - all you're doing is adding a little extra width to the body to meet the regulations so that a wider wheel doesn't "stick out" too much. These aren't creating more room to stop rubbing, right? I will say BMW did a better job that VWoA with the new Golf R and the goofy little plastic pieces they clipped to the fenders.
	Appreciate 0 Quote

08-19-2023, 11:03 AM	#8
AddictedTo///M Second Lieutenant 220 Rep 229 Posts Drives: 2022 BMW M340i xDrive Join Date: Apr 2016 Location: O-H iTrader: (1)	Looks great! Have you mounted the rear portion yet? What front lip are you running? LCI?
	Appreciate 0 Quote

09-12-2023, 11:21 PM	#12
Soslomode New Member 11 Rep 12 Posts Drives: M340i Join Date: Mar 2023 Location: Fort Lauderdale iTrader: (0)	Any pictures with the rear arch done?
	Appreciate 0 Quote

08-18-2023, 07:05 AM	#7
Paulskit Private 83 Rep 85 Posts Drives: M340i 2023 Join Date: Nov 2022 Location: Kyiv iTrader: (0)	Doesn't 893M fit perfectly to G20 without any extenders?
	Appreciate 0 Quote

09-15-2023, 09:40 PM	#13
siegester Captain 345 Rep 751 Posts Drives: '20 M340i Join Date: Jan 2011 Location: USA iTrader: (0) Garage List 2020 BMW M340i [0.00]	I'd love to see the rears too! I just mounted some aggressive 295s on the rear and would love to add these for better aesthetics
	Appreciate 0 Quote

09-25-2023, 12:29 AM	#15
Mikheil Registered 0 Rep 2 Posts Drives: BMW G20 LCI Join Date: Sep 2023 Location: Thailand iTrader: (0)	Hi Steve, Im curious where did you get the carbon fender vent, could you share me the details please…? Attached Images
	Appreciate 0 Quote

04-30-2024, 11:50 AM	#21
D0NVT Enlisted Member 3 Rep 30 Posts Drives: 330d Join Date: Feb 2023 Location: Moscow iTrader: (0)	Good job!
	Appreciate 0 Quote

05-01-2024, 07:45 AM	#22
slm266 Private 21 Rep 52 Posts Drives: 2020 M340 xdrive Join Date: Feb 2024 Location: Dallas, texas iTrader: (0)	I know a guy who has G80 wheels: 19x9.5+20 + 20x10.5+20 He spent ~$1000 on fender cut+rolled+rewelded and then wrapped the car instead of repainting fenders (Car is dirty from recent rain) Attached Images
	Appreciate 0 Quote