01-07-2022, 06:48 AM | #1 |
Private
149
Rep 73
Posts
Drives: BMW G20 320i M Performance
Join Date: Oct 2021
Location: South Korea
|
(G20 DIY 5) Gesture Control (VO 6U8)
My G20 was not Gesture Control. (Now Can Gesture Control)
Can Retrofit Gesture Control. Need 2 Wiring and FZD Module. (with Esys Coding) -Parts Number- FZD Module with Gesture Control 61319483615 61319460012 61319893141 61316986144 61319875363 61317910960 61315A0F616 61315A25179 - One of These FZD Pin 61139230107 - NanoMQS 0.22-0.35mm BDC Pin 61131383776 - MQS 0.2-0.35mm -Need Tools- Trim Remover IWISS Press Tool Star Wrench T15 Star Wrench T20 *Torque Tools (preferbly to have) -Main DIY- 1. Removal FZD Module 2. Make Wire 3. Change FZD Module 4. VO Coding -Wiring- Check Image Go DIY (watch my video or repair guide) (I'm so sorry... video is not Eng sub. only Korean) Check PDF File or Video 1. Remove FZD Module 2. Remove A Pillar Trim & BDC Cover 3. Make Wire FZD to BDC 4. Assemble New FZD Module 5. Add VO 6U8 5. BDC, MGU, FZD Code or Flashing (Maybe no need BDC Code)
__________________
Freelancer without work
Last edited by soi3847; 02-14-2022 at 03:45 AM.. |
Appreciate
8
VipinLJ1941.50 BigMofoFrog179.00 oreoOozZz126.00 bimmerelectric14.50 panki_86112.00 Bambazonke210.00 baturbo47.50 the3mw76.50 |
07-04-2022, 04:17 AM | #4 | |
Lieutenant
210
Rep 451
Posts
Drives: 2017 X5 & 2020 X5
Join Date: Mar 2014
Location: Mackay Queensland
|
Quote:
__________________
Current: MY 20 X5 2.5d xDrive MSport
MY 17 X5 2.5d sDrive |
|
Appreciate
1
soi3847149.00 |
07-09-2022, 01:53 AM | #6 | |
Private
149
Rep 73
Posts
Drives: BMW G20 320i M Performance
Join Date: Oct 2021
Location: South Korea
|
Quote:
__________________
Freelancer without work
|
|
Appreciate
0
|
07-09-2022, 01:54 AM | #7 |
Private
149
Rep 73
Posts
Drives: BMW G20 320i M Performance
Join Date: Oct 2021
Location: South Korea
|
I same. I don't use gesture control...
__________________
Freelancer without work
|
Appreciate
0
|
02-04-2024, 01:30 PM | #8 |
Second Lieutenant
35
Rep 276
Posts |
Did the retrofit on my g31 add cafd, vo coded fzd and hu, reinitialized the pano roof. Everything works roof lights, pano except the gesture controle that doesnt work.
When i use insta to read the faults it says gesture camera not working. What can cause this cause it seems doubtfull that the camere is really broken. Any ideas? I used an fzd with partnr 61319875363 |
Appreciate
1
soi3847149.00 |
02-15-2024, 02:13 PM | #9 | |
Second Lieutenant
35
Rep 276
Posts |
Quote:
Last edited by deneyer; 02-18-2024 at 05:15 AM.. |
|
Appreciate
1
soi3847149.00 |
02-22-2024, 06:31 PM | #10 |
Private
149
Rep 73
Posts
Drives: BMW G20 320i M Performance
Join Date: Oct 2021
Location: South Korea
|
tried flashing and detect cafd?
maybe gesture camera is broken
__________________
Freelancer without work
|
Appreciate
0
|
02-24-2024, 05:32 PM | #11 |
Lieutenant
210
Rep 451
Posts
Drives: 2017 X5 & 2020 X5
Join Date: Mar 2014
Location: Mackay Queensland
|
I looked at this retrofit option in my X5 but in my case it is a lot more complicated in that you need to run 2 additional canbus wires to the main BCM module for the car to recognise the camera in addition to the coding. If you have already done this make sure the pins are connected in the correct position and not the wrong way around.
__________________
Current: MY 20 X5 2.5d xDrive MSport
MY 17 X5 2.5d sDrive |
Appreciate
0
|
02-24-2024, 07:57 PM | #12 |
BDE
12
Rep 34
Posts |
Same. Seemed like a solution in search of a problem. It's harder and more awkward to do things with gestures than hitting a button, and I would accidently activate its sometimes unintentionally.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|