[Darren Lewis]

Originally Posted by Manboy

BMW changed something with the latest software for KOMBI. If you chose M Cluster in Bimmer code, and have the latest sofware you are going to get the "3.0CSL" logo by default. If you then try to code another logo via LOGO_SCHRIFTZUG the "3.0CSL" logo will disappear and it will just be a blank space.

I did not have this issue before my update in November.

I have not yet taken the 11/2022.60 update, but I am also getting the 3.0 CSL logo in the M Cluster. (still on 7/2022)

[320iG20]

Originally Posted by g20beam

Hello

To enable M Logo in default instrument cluster, go to DKOMBI4 and look for LOGO_SCHRIFTZUG, then select msp_logo.

Enjoy M Logo in default instrument cluster!

View screenshots for reference:

Does this work again and would this also be possible for the half digital cluster?

This seems to be stock on G30s with engines smaller 540i.

[G20agba]

I have a 2020 330i sportline. I want to stick with the default bmw cluster. Is there a way to code the 3 stripe logo in the center without the letter “M”?

[zonwe51]

My Car g20 Lci sport line is id8, I want to coding instrument panel to M Sport cluster but DKOMBI8 can't read in BU, How can I do? thanks~

[guibimmer]

I Need help, just coded my 330e to this M looking dash however my battery level on the right is gone, also when in hybrid revs don’t move at all on if in sport, any ideas???

[g20beam]

Originally Posted by guibimmer

I Need help, just coded my 330e to this M looking dash however my battery level on the right is gone, also when in hybrid revs don’t move at all on if in sport, any ideas???

Restore the coding. There are many other parameters you must configure. I advise not doing this on Bimmercode, should ask a programmer. There are options that cannot be accessed by Bimmercode to make this worthwhile.

Try BimmerWorks on Facebook, they’re good. Tell them you need it done and they will do it for you perfectly with no errors. They are quick and professional, you just need a Windows laptop and E-Sys installed.

[guibimmer]

Originally Posted by g20beam

Restore the coding. There are many other parameters you must configure. I advise not doing this on Bimmercode, should ask a programmer. There are options that cannot be accessed by Bimmercode to make this worthwhile.

Try BimmerWorks on Facebook, they’re good. Tell them you need it done and they will do it for you perfectly with no errors. They are quick and professional, you just need a Windows laptop and E-Sys installed.

Thanks I’ll try contacting them, it is definitely not as easy as it looks.

[vanoid]

Originally Posted by guibimmer

I Need help, just coded my 330e to this M looking dash however my battery level on the right is gone, also when in hybrid revs don’t move at all on if in sport, any ideas???

how did you code m cluster with m logo in middle?
mine has just blank space

[dewman]

How do you code the 'X5 M 50i' logo?