[Chubbiejones]

For those who have ventured out and powder coated your brake calipers with a custom color if you could please post your pictures that would be great!

In addition to the above, were you required to rebuild your calipers?

[helmet91]

In for more info.

I have a set of 348x36 calipers off a Euro-spec G30 that are just bare metal or whatever. I need to find a place to powdercoat too...

[Chubbiejones]

Originally Posted by helmet91

In for more info.

I have a set of 348x36 calipers off a Euro-spec G30 that are just bare metal or whatever. I need to find a place to powdercoat too...

I keep reading from threads that powder coating calipers is not the best application due to its increased thickness on the caliper. With that stated there is a gentleman who is local to my area who custom paints calipers at your location (see his FB page below):

https://www.facebook.com/goodfellowcustomcoatings/

From what I can tell from the pictures and review his work looks legitimate and professional. I will most likely travel in this direction vs the removal of my calipers and powder coating.

I am not sure where you are located but this might be an option as well

[DarrylW]

Cerakote. Thin tough and brake fluid won’t effect it