[shawnsheridan]

Originally Posted by Sbuju12

Hi Shawn,
Can I also have receive the latest PSDZdata files?
Thank you

PM sent.

[Litos_]

Hi,

I have bought e-sysX, and want to code a G20 330e. Can anyone send me esys and psdzdata light?

[shawnsheridan]

Originally Posted by Litos_

Hi,

I have bought e-sysX, and want to code a G20 330e. Can anyone send me esys and psdzdata light?

PM sent.

[Litos_]

Thanks Shawn, I believe you have missed to include E-Sys.
Regards

[shawnsheridan]

Originally Posted by Litos_

Thanks Shawn, I believe you have missed to include E-Sys.
Regards

PM sent.

[mnavis29]

Hi Shawn,

Also purchased EsysX and would like to Code my G05 with i-Step 07/2020. Would you mind sharing the latest PSDZ data?

[siegester]

I will hopefully be updated to 07/2020 Tuesday, please PM me the latest link too shawnsheridan

[shawnsheridan]

Originally Posted by mnavis29

Hi Shawn,

Also purchased EsysX and would like to Code my G05 with i-Step 07/2020. Would you mind sharing the latest PSDZ data?

Originally Posted by siegester

I will hopefully be updated to 07/2020 Tuesday, please PM me the latest link too shawnsheridan

PM's sent.

[iagorz]

Originally Posted by shawnsheridan

PM's sent.

Hi Shawn,
Can I also have receive the latest PSDZdata files?
Thank you

[eleykin]

Hi Shawn can you please also send it to me.

[shawnsheridan]

Originally Posted by iagorz

Hi Shawn,
Can I also have receive the latest PSDZdata files?
Thank you

Originally Posted by eleykin

Hi Shawn can you please also send it to me.

PM's sent.

[Litos_]

Hi Shawn,

I have installed e-sys E-Sys_Setup-3.30.1-49938 and psdzdata v.4.25.33_PSdZData_Lite, and I am having problemas with the fdl mapping, is this related with old versions, as my car is a G20 11/2019 330e


https://gifyu.com/image/6Fd8
https://gifyu.com/image/6FdR



Regards
Carlos

[shawnsheridan]

Originally Posted by Litos_

Hi Shawn,

I have installed e-sys E-Sys_Setup-3.30.1-49938 and psdzdata v.4.25.33_PSdZData_Lite, and I am having problemas with the fdl mapping, is this related with old versions, as my car is a G20 11/2019 330e

Regards
Carlos

For new Gxx car, you likely need E-Sys Launcher PRO 3.7 or E-SysX for the latest ECU CAFD Mapping as E-Sys Launcher PRO 2.8 included below is not current enough, and these can only be obtained from the developers direct. And since TokenMaster is missing, that leaves only E-SysX:

https://esysx.com/product/esysx-32-64-bit/

[Litos_]

Thanks for your explanation.
I had already bought EsysX, but I was starting from esys icon instead of esysX.
Now it seems the cafd mapping is correct.
Thanks

[shawnsheridan]

Originally Posted by Litos_

Thanks for your explanation.
I had already bought EsysX, but I was starting from esys icon instead of esysX.
Now it seems the cafd mapping is correct.
Thanks

[Litos_]

Help again!
Can't find cheats codes for g20, tried almareto.xml and added it to esysX, but in the fdl-editor the right box is always empty. already found a youtube tutorial to diseable video in motion and I think I managed to do it, need to test.
Do you have that info?
Regards
Carlos

[shawnsheridan]

Originally Posted by Litos_

Help again!
Can't find cheats codes for g20, tried almareto.xml and added it to esysX, but in the fdl-editor the right box is always empty. already found a youtube tutorial to diseable video in motion and I think I managed to do it, need to test.
Do you have that info?
Regards
Carlos

Yes.

[Litos_]

can you PM to me?

[juhcobywankenobi]

Originally Posted by Litos_

Help again!
Can't find cheats codes for g20, tried almareto.xml and added it to esysX, but in the fdl-editor the right box is always empty. already found a youtube tutorial to diseable video in motion and I think I managed to do it, need to test.
Do you have that info?
Regards
Carlos

I'm struggling on adding cheat codes to esysx as well. I think I read all the directions on this thread. If you find out how to import them that would be great.

[Litos_]

Originally Posted by juhcobywankenobi

I'm struggling on adding cheat codes to esysx as well. I think I read all the directions on this thread. If you find out how to import them that would be great.

Hi juhcobywankenobi,

I have configured EsysX has the attached screenshot, but isn't working, already tried with almaretto.xml

https://gifyu.com/image/6VcO

[Deja011]

Originally Posted by Litos_

Hi juhcobywankenobi,

I have configured EsysX has the attached screenshot, but isn't working, already tried with almaretto.xml

https://gifyu.com/image/6VcO

This is a known bug with the previous version of esysx this has been just fixed in the last release. A work around is to uncheck "enable fdl cheat codes" click apply. Then again click the checkbox to enable and apply. Now refresh in esysx and it will show the cheat codes.

I can confirm this is fixed in the last update as I just got it and also as per the change log.

[Litos_]

Originally Posted by siegester

Getting Started
Start here - https://www.bimmerfest.com/forums/sh...php?p=10193333
NOTE: Do NOT follow the charity donation instructions in the PDF in the link above. Instead, email tokenmaster directly and request the donation instructions. You should receive an auto reply detailing the exact steps and requirements. Follow those and you should get launcher pro 3.x fairly quickly.

Once you have all the software installed per the link above, go here - https://www.bimmerfest.com/forums/sh...d.php?t=983245

I had issues getting Launcher PRO 3.6 to update the cheat codes, so I went to - https://github.com/packetpilot/bmw-f/tree/master/cheats - and downloaded the repository as a ZIP. I then extracted the contents of the cheats folder to:
C:\Program Files (x86)\TokenMaster\E-Sys Launcher PRO\FDLCodes
Note: Launcher Pro 3.7 seems to be better at updating these, so this step may not be necessary

Then, in Launcher Pro I selected the Authors I wanted to load. The following are Authors are good to start with for g20 coding (s18a):

• Almaretto
• jokinawa

You can view what I have coded in a more readable format at - https://github.com/siegester03/bmw-g-series-coding

So far, I have successfully coded the following:

• Remove legal disclaimers (HU_MGU cheat)
• m startup animation (HU_MGU cheat)
• ASS memory (dme)
• ASD off (RAM)
• air con memory (IHKA)
• video in motion (HU_MGU cheat)
• close trunk from fob (hkfm2)
• close trunk from door switch (hkfm2)
• full SMS display (hu_mgu)
• Coasting (HU_MGU cheat)
• Speed Correction (dkombi)
• 5x Turn Indicator (HU_MGU cheat)
• Lane change assistance (bdc_body, hu_mgu, sas2)
• Comfort+ Mode (HU_MGU and BDC_BODY3 cheats)
• Driver's seat heat distribution (does not seem to work properly if at all)
• Auto activate heated steering wheel when cold (hu_mgu, bdc_body)
• comfort+ mode (bdc_body)
• enable sailing (bdc_body)
• anti-dazzle/no glare high beams (VO code 5AC out)

Testing/Verifying

• Flashing Brake Force Display (bdc_body)

I don't believe are possible due to hardware restrictions

• Enable blue lights in headlamps (laser lights)

Feature                           ECU          Property                         Value            
auto steering wheel heat          HU_MGU       AKT_Auto_Lenkrad                  aktiv
                                  BDC_BODY     LHZ_CCM_IKF                       aktiv
                                  BDC_BODY     IKF_ENABLE                        ikf_alle_sitze

lane change assistance            BDC_BODY     SPURWECHSEL_ASSISTENT             aktiv
                                  HU_MGU       SPURWECHSELASSISTENT              gen_1
                                  SAS2         C_SWA_VORHANDED                   NR001_VORHANDEN

Driver's seat heat distribution   SM2          SHZ_TYP                           werte 02
                                  BDC          SITZHEIZUNG_FRONT_schichtung      active
                                  BDC          SITZHEIZUNG_FOND_schichtung       active
                                  HU_MGU       HVAC_SEATHEAT_DISTR_FRONT         active

*Note: any feature not found in the table above is already available through the cheat code authors I mentioned.

Hi, Can you please share the coding details, so I can code, because I can't find how to do it?