04-13-2020, 08:21 AM | #155 |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
MY86 ,
Here's what I coded, using E-Sys & ProLauncher, but should work with Bimmercode in Expert Mode: × DKOMBI4 ECU Anzeige_Configuration> 10Seglen_In_Comfort_Modus from 00 to 01 * HG_MGU: Not sure which function (HMI_SPEECH?) Global_Conf_Sailing from 00 to 01 Eff_Dyn_Sailing from 00 to 01 Sailing_Counter from 00 to 01 You end up with a check box to check on iDrive under SETTINGS, CAR This will give you coasting in Comfort; you should already have in EcoPro (check box in SETTINGS, CAR,DRIVE MODE) Hope that helps!
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
1
MY8615.00 |
04-13-2020, 10:47 AM | #156 |
Enlisted Member
15
Rep 48
Posts |
Thanks a lot RSnic That worked like a charm.
Do you also have an idea about how to make G Meter appear on the digital cluster? Unfortunately, we don't have the G meter widget available from the factory. Also the 'valet parking mode' could be done with coding? siegester Last edited by MY86; 04-13-2020 at 11:21 AM.. |
Appreciate
0
|
05-03-2020, 03:26 PM | #157 |
Enlisted Member
7
Rep 43
Posts |
Hi, I have been trying to read up as much as possible on coding for my G20. Am I correct in assuming that EsysX is the only current (other than Bimmercode) option for G20, as the developer of esys launcher 3.x isn't currently active? Thanks.
I am trying to code Sport+, Lane Change Assist, and Assisted Driving View. I think that bimmercode would work for Sport+, and ADV, but I don't think there is currently a way to code LCA with bimmercode is there? |
Appreciate
0
|
05-04-2020, 03:20 AM | #158 |
New Member
3
Rep 5
Posts |
You will be able to get esysx more reliably than TokenMaster‘s Launcher. I’m using both, but esysx is weird, too. Bought a license in 09‘19, now I can’t access the web portal anymore, unknown login. Weird.
|
Appreciate
0
|
05-11-2020, 05:09 PM | #159 | |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
Quote:
I have coded with E-Sys & ProLauncher -- mainly because I used it on my old F30; think I did Assisted Driving View & Lane Change Assistant with it. I also have used Bimmercode with a MX+ OBDLINK. This is quite handy, BUT urge you to turn off car's Bluetooth while using and not all modules have expert mode yet Hope that helps!
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
|
Appreciate
0
|
05-12-2020, 03:24 AM | #160 | |
Second Lieutenant
45
Rep 243
Posts |
Quote:
And it's not cheap either. I paid more for EsysX that I might use once or twice ever, than I paid for MS Office that I use every day (and I don't have to compromise my other applications for Office). If you're a G-series owner it's really not looking good for the future of coding at the moment. |
|
Appreciate
0
|
05-12-2020, 07:35 AM | #161 | ||
Enlisted Member
7
Rep 43
Posts |
Quote:
|
||
Appreciate
0
|
05-17-2020, 07:42 AM | #163 | |
Enlisted Member
7
Rep 43
Posts |
Quote:
Just have a question. I see that you coded this:[*]ASS memory (dme) I tried to do it using the shortcuts (and manually) and had a coding error in esys. While coding the car turned off in the middle. I tried it twice (once shortcut, once manual). Same thing happened. Hopefully it didn't do anything bad. How did you manage to get it working? Thanks! |
|
Appreciate
0
|
05-17-2020, 08:33 AM | #164 | ||
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
Quote:
Because you are coding DME_BACKUP (which controls some engine functions), the engine turns off -- I had the same thing happen. What I discovered is that, using E-Sys, I do everything up to turning TSA_MEMORY to aktiv, then BEFORE I tap the CODE button, I turn engine off. If, on the other hand, you use Bimmercode, you don't have engine running, just car in diagnostic mode (3 quick pushes on Engine Start button WITHOUT pushing down on brake) As I said, I made same mistake. I haven't noticed any problems except that ASS always switches off when I unlock & open driver's door (I have coded car to start in EcoPro). Having said that, oddly ASS stays off going into & out of the other driving modes. Hope that helps!
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
||
Appreciate
0
|
05-17-2020, 08:41 AM | #165 | |
Enlisted Member
7
Rep 43
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2020, 09:24 AM | #166 |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
@TheGrok ,
For the error, as best I can figure, that's exactly right. I got that tip from one of the real coding gurus, shawnsheridan
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
1
TheGrok7.00 |
05-17-2020, 09:46 AM | #167 |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Code with motor running all ECU EXCEPT DME/DDE. You can't code motor ECU if Motor is running. Engine will stall and DME/DDE CAFD will become missing or corrupt.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
1
TheGrok7.00 |
05-17-2020, 09:48 AM | #168 | |
Enlisted Member
7
Rep 43
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2020, 09:58 AM | #169 |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Yes, if car stalled out during coding. Check DME and see if CAFD is still present, and if so, is not named cafd_ffffffff-255_255_255.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
1
TheGrok7.00 |
05-17-2020, 10:07 AM | #170 | |
Enlisted Member
7
Rep 43
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2020, 10:23 AM | #171 |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Looks ok. You got lucky.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
1
TheGrok7.00 |
05-17-2020, 10:38 AM | #172 |
Enlisted Member
7
Rep 43
Posts |
|
Appreciate
0
|
05-17-2020, 10:52 AM | #173 |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Yes, but not because you saved anything.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
1
TheGrok7.00 |
05-19-2020, 05:15 AM | #174 | |
Private
32
Rep 50
Posts |
Quote:
|
|
Appreciate
0
|
05-20-2020, 03:49 PM | #175 |
Major
236
Rep 1,037
Posts |
Has anyone enabled SMS/enhanced Bluetooth functionality with BimmerCode?
__________________
M340i: Arctic White, 790M wheels, Cognac interior, Aluminum Tetragon trim - Totaled
|
Appreciate
0
|
05-23-2020, 06:48 PM | #176 | |
Enlisted Member
7
Rep 43
Posts |
Quote:
Hi, wondering how you coded ASD OFF. Unless I missed something, there aren't shortcuts available for that and I am not sure which values I need to change in ESYS nor in which module. Thanks! |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|