06-18-2021, 04:44 PM | #1 |
BMW Enthusiast
175
Rep 221
Posts |
Bimmercode Android 11
Hey everyone in case you're having problems connecting to Bimmercode on Android 11 with an Ethernet cable there are new directions. Maybe I am the only thick one out there but I messed with it for a half an hour until I noticed the new instructions in their manual.
ENET cable connection (Android 11) 1. Connect the ENET cable with your Android device using an appropriate USB to Ethernet adapter. 2. Connect the cable to the OBD port in the footwell on the driver side in the car. 3. Enable the Airplane mode on the Android device. 4. Enable “Ethernet tethering“ in the Android settings (“Settings“ > “Connections“ > “Mobile Hotspot and Tethering“ > “Ethernet tethering“). 5. Open the settings in the BimmerCode app and make sure the correct adapter type is selected. 6. Tap “Connect” on the start screen in the BimmerCode app. Last edited by clone1008; 06-19-2021 at 03:47 PM.. |
06-19-2021, 02:17 PM | #2 | |
Petrolhead
1949
Rep 3,520
Posts |
Quote:
__________________
Current:
2020 BMW 330i xDrive 2018 Audi SQ5 Prestige 2017 Audi A7 Prestige |
|
Appreciate
0
|
06-19-2021, 03:50 PM | #3 |
BMW Enthusiast
175
Rep 221
Posts |
|
Appreciate
0
|
06-19-2021, 04:19 PM | #4 |
Petrolhead
1949
Rep 3,520
Posts |
Hehe it's always nice to have company!
And I just tried what you said and it works. Not just for Bimmercode but with the BM3 app as well (though you don't need to be in airplane mode for BM3 since it needs an internet connection).
__________________
Current:
2020 BMW 330i xDrive 2018 Audi SQ5 Prestige 2017 Audi A7 Prestige |
Appreciate
0
|
06-19-2021, 07:15 PM | #6 |
BMW Enthusiast
175
Rep 221
Posts |
|
Appreciate
0
|
06-19-2021, 07:18 PM | #7 | |
BMW Enthusiast
175
Rep 221
Posts |
Quote:
https://bootmod3.atlassian.net/wiki/...+WiFi+Settings |
|
Appreciate
1
VipinLJ1949.00 |
06-20-2021, 01:00 PM | #9 | |
Petrolhead
1949
Rep 3,520
Posts |
Quote:
__________________
Current:
2020 BMW 330i xDrive 2018 Audi SQ5 Prestige 2017 Audi A7 Prestige |
|
Appreciate
1
clone1008174.50 |
02-08-2022, 04:41 PM | #11 |
First Lieutenant
143
Rep 347
Posts |
In the Bimmercode app, in the manual go to section:
ENET Cable Connection and follow the instructions to set the Static IP Address. It will then work first time, every time.... and its blazing fast as well. My setup was a bit hit or miss until I did this.
__________________
G20 M340d X-Drive M Performance, Black Sapphire, HUD, Adaptive Susp...... previously
F31 335d Xdrive Shadow Edition M Performance, Individual Tanzanite Blue, HUD, Adaptive Susp, Evolve-R Map, Xhp Stage 3 E60 535d Msport Carbon Black/E39 530d MSport, Black Sapphire/E34 525i MSport, Avus Blue/E34 520i MSport, Briliant Red |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|