[Almaretto]

Originally Posted by michael.bramblett

Hey everyone got my g20 less than 24 hours ago and already miss adaptive beam from my last car… I’ve used BimmerCode a lot but going to take a crack at BU. Can I have the latest coding info please??

Also, confused on cheat sheets. If I save them, does that mean they’re automatically all applied to the car? Or just a reference on where to go and what values to change? I’ve been watching vids on YouTube but still a tad confused. Thanks!

You get software from developer website.

For Cheat codes, you have to enable desired functions and then write to car in two steps.

[sd_dracula]

Hi shawnsheridan can I pls get the latest code link, looking for something that will include 07/2021.585 for the G20.
Thanks

[shawnsheridan]

Originally Posted by sd_dracula

Hi shawnsheridan can I pls get the latest code link, looking for something that will include 07/2021.585 for the G20.
Thanks

PM sent.

[michael.bramblett]

Originally Posted by shawnsheridan

PM sent.

Hey Shawn. Can you send to me as well? Thanks!

[shawnsheridan]

Originally Posted by michael.bramblett

Hey Shawn. Can you send to me as well? Thanks!

PM sent.

[sd_dracula]

How do you edit the hex values again in esys? It's been a while.
In SAS3 need to update C_SLA_UCC_Land_aktiv from 08,00,00,00 to FF,FF,FF,FF
I can right click and edit the 08,00,00,00 but not sure how to save it.

[shawnsheridan]

Originally Posted by sd_dracula

How do you edit the hex values again in esys? It's been a while.
In SAS3 need to update C_SLA_UCC_Land_aktiv from 08,00,00,00 to FF,FF,FF,FF
I can right click and edit the 08,00,00,00 but not sure how to save it.

E-Sys - How to Change Werte Values.pdf:

https://mega.nz/file/YhgyQRxD#OMDQxz...bJ7WBXdabZNjtA

[sd_dracula]

Aha that tiny icon on the right side.
Thanks shawnsheridan gentleman as usual

[shawnsheridan]

Originally Posted by sd_dracula

Aha that tiny icon on the right side.
Thanks shawnsheridan gentleman as usual

[Div22]

Hello

I just bought a G20 and ENET cable. I want to start coding using E-sys, can anyone send me the latest working cheat codes/sheet.

I want to code these two features to start with:

1. Turn off (disable) Auto start/stop feature by default.

2. Start in Eco pro mode by default.

Please send me codes for above two features, really need them. Thank you 🙏🏻

[Div22]

Originally Posted by shawnsheridan

PM sent.

Shawn, please send me the latest coding list as well. Really need to turn off auto start-stop and start in eco pro mode by default. Thank you

[shawnsheridan]

Originally Posted by Div22

Shawn, please send me the latest coding list as well. Really need to turn off auto start-stop and start in eco pro mode by default. Thank you

PM sent.

[Matthias_22]

Originally Posted by shawnsheridan

PM sent.

Hi Shawn,
Do you have for me the latest PsdzData for my X5 (G05) with 7/2022.57?
Using PsdzData from ISTA 4.35.42 and line S18A_22_03_565 during connection is not working.
Regards,
Matthias

[shawnsheridan]

Originally Posted by Matthias_22

Hi Shawn,
Do you have for me the latest PsdzData for my X5 (G05) with 7/2022.57?
Using PsdzData from ISTA 4.35.42 and line S18A_22_03_565 during connection is not working.
Regards,
Matthias

PM sent.

[Matthias_22]

Hi Shawn,
Thanks for the PM. It works now.
But next problem: I want to code the SAS3 control unit. So right click on the correct line and then Read Coding Data; Open the map and then richtclick on the next line. Now comes the problem, in grey I have the options code, Read Coding Data, Expand and Collapse. In black Edit NCD. But no <SvtCompareView.edit.fdl.name.
Can you tell me what I do wrong?
I'm using e-sys 3.38.2 with psdzdata 4.38.21 X5 G05 with 7/2022.57

Matthias 22

[shawnsheridan]

Originally Posted by Matthias_22

Hi Shawn,
Thanks for the PM. It works now.
But next problem: I want to code the SAS3 control unit. So right click on the correct line and then Read Coding Data; Open the map and then richtclick on the next line. Now comes the problem, in grey I have the options code, Read Coding Data, Expand and Collapse. In black Edit NCD. But no <SvtCompareView.edit.fdl.name.
Can you tell me what I do wrong?
I'm using e-sys 3.38.2 with psdzdata 4.38.21 X5 G05 with 7/2022.57

Matthias 22

Use Edit NCD.

[sai23]

Hi shawnsheridan Could I please have the latest E-Sys and PSDZData info?

Thank you!

[Matthias_22]

Originally Posted by shawnsheridan

Use Edit NCD.

I did, but when I then search for C_SWA_VORHANDEN there is no result. So I don't know how to find that line to code.

[shawnsheridan]

Originally Posted by Matthias_22

I did, but when I then search for C_SWA_VORHANDEN there is no result. So I don't know how to find that line to code.

That because it either does not exist in your CAFD, or it is not mapped by whatever CAFD Mapping solution you are using.

What is name of CAFD?

[shawnsheridan]

Originally Posted by sai23

Hi shawnsheridan Could I please have the latest E-Sys and PSDZData info?

Thank you!

PM sent.

[Matthias_22]

Originally Posted by shawnsheridan

That because it either does not exist in your CAFD, or it is not mapped by whatever CAFD Mapping solution you are using.

What is name of CAFD?

CAFD_000042C1_003_006_010
in SAS3 ECU

[shawnsheridan]

Originally Posted by Matthias_22

CAFD_000042C1_003_006_010
in SAS3 ECU

It's there:



BimmerUtility properly maps it.