[richardexonG21]

Originally Posted by omarBMW

Has anyone installed this amp on a G20 with the base 6 speaker sound system?

Yes replaced all 6 speakers and installed the bmw7dsp amp today

[omarBMW]

Originally Posted by richardexonG21

Yes replaced all 6 speakers and installed the bmw7dsp amp today

How is the sound compared to the stock setup? Is it worth it?

Also, is it louder?

[Northman]

Originally Posted by richardexonG21

Yes replaced all 6 speakers and installed the bmw7dsp amp today

did you add tweeters since the base audio only has 4xmids and 2xsubwoofers?
im thinking of upgrading my base audio, but I wanna add tweeters in front doors like in HiFi system on the picture below.

[richardexonG21]

Originally Posted by omarBMW

How is the sound compared to the stock setup? Is it worth it?

Also, is it louder?

Early days yet,still to program the amp with the bmw G21 settings

but it’s definitely louder!!

[richardexonG21]

Originally Posted by Northman

did you add tweeters since the base audio only has 4xmids and 2xsubwoofers?
im thinking of upgrading my base audio, but I wanna add tweeters in front doors like in HiFi system on the picture below.

I was thinking of doing this then opted for the mids with built in tweeters for both front and rears.

[richardexonG21]

Has anyone with Base audio added a center speaker on the dash,just wanting to know if there is a connection available to just plug the additional speaker in?

[Encanto]

Originally Posted by richardexonG21

Has anyone with Base audio added a center speaker on the dash,just wanting to know if there is a connection available to just plug the additional speaker in?

There is no wiring in there.

[omarBMW]

Originally Posted by Northman

did you add tweeters since the base audio only has 4xmids and 2xsubwoofers?
im thinking of upgrading my base audio, but I wanna add tweeters in front doors like in HiFi system on the picture below.

Where can I buy these and how expensive are they?

[richardexonG21]

Originally Posted by Encanto

There is no wiring in there.

Ok Cheers

[Northman]

Originally Posted by omarBMW

Where can I buy these and how expensive are they?

i found them on ebay and some are on amazon from china
its part number is (51-33)7447171 and (51-33)7447172 window frame with tweeter left/right

[omarBMW]

Hey guys,

I recently installed the amp and now my turn signal noise is very loud. How did you guys fix this?

Also, before I installed the amp, for some reason my turn signal noise was coming out from the passenger side speaker as well (I have the base 6 speaker stereo).

Anyone know a fix?

[freej]

Originally Posted by omarBMW

Hey guys,

I recently installed the amp and now my turn signal noise is very loud. How did you guys fix this?

Also, before I installed the amp, for some reason my turn signal noise was coming out from the passenger side speaker as well (I have the base 6 speaker stereo).

Anyone know a fix?

I have the same issue. Just installed the amp into my 2022 G20 M340i but I got it off Kies so I didn't get any config file or settings file. Waiting for someone from Bimmertech to get back to me because the turn signal and the fake engine noise are unbearable.

Ordered a coder so I can turn off the engine noise but looking for a solution on the turn signal.

[AustraliaG20]

I got the installer to reduce it in the tune. Not sure what he actually did though... maybe just reduced that actual frequency? It was horrific for a while and now has it is OK.

[freej]

Good to know. Still waiting for them to get back to me. Figure it will be a while with the holidays. I tried disabling the fake engine noise with BimmerCode but I don't feel like it worked. Guess I'll see how things improve when someone from Bimmertech can walk me through properly configuring the amp.

[Calamari]

Originally Posted by AustraliaG20

I got the installer to reduce it in the tune. Not sure what he actually did though... maybe just reduced that actual frequency? It was horrific for a while and now has it is OK.

I'm wondering: Does indicator sound comes through all channels or just some (front, front-left ? The same question for fake engine sound?

[AustraliaG20]

Indicator doesn't seem to go through every speaker. ASD comes through it's own speaker under the car near the exhaust. That at least seems to be the case for mine as it was obviously coming from there when it was much louder. I have no exhaust noise from the inside car speakers.

[Calamari]

Originally Posted by AustraliaG20

Indicator doesn't seem to go through every speaker. ASD comes through it's own speaker under the car near the exhaust. That at least seems to be the case for mine as it was obviously coming from there when it was much louder. I have no exhaust noise from the inside car speakers.

Thanks for confirming

[freej]

I am still hearing the ASD even though I have it turned off in Bimmercode. If I rev the engine when stopped, it sounds normal, but as soon as I start driving it sounds really fake and loud. Still crossing my fingers on configuring the bimmer-tech amp when they get back to me.

I heard of people pulling the fuse to the ASD, is that possible in the 2022 G20s? I didn't do a lot of testing before/after installing the amp so this wasn't something I really noticed until everything, including the turn signal, got a lot louder. Other than that, the speakers sound great. I really like the amp, just need to work out these minor issues.

[Encanto]

Originally Posted by freej

I am still hearing the ASD even though I have it turned off in Bimmercode. If I rev the engine when stopped, it sounds normal, but as soon as I start driving it sounds really fake and loud. Still crossing my fingers on configuring the bimmer-tech amp when they get back to me.

I heard of people pulling the fuse to the ASD, is that possible in the 2022 G20s? I didn't do a lot of testing before/after installing the amp so this wasn't something I really noticed until everything, including the turn signal, got a lot louder. Other than that, the speakers sound great. I really like the amp, just need to work out these minor issues.

The ASD in the G20 is software, not hardware.

[adr_bimmer]

Was wondering what would happen if I connected the Match UP 7DSP to their pp-iso cable with no external battery connection? As I have already the Match pp62dsp installed and I’d like to basically just swap them out for like 5 min to have a listen without actually grab cables from battery. I have the base sound system btw. Thanks

[AustraliaG20]

Originally Posted by freej

I am still hearing the ASD even though I have it turned off in Bimmercode. If I rev the engine when stopped, it sounds normal, but as soon as I start driving it sounds really fake and loud. Still crossing my fingers on configuring the bimmer-tech amp when they get back to me.

I heard of people pulling the fuse to the ASD, is that possible in the 2022 G20s? I didn't do a lot of testing before/after installing the amp so this wasn't something I really noticed until everything, including the turn signal, got a lot louder. Other than that, the speakers sound great. I really like the amp, just need to work out these minor issues.

This just sounds like ASD isn't off. I would double check that it's off and that an update hasn't reset it back to on. ASD is louder when the car is moving. Are the indicators and phone louder too?

99% sure you can't pull the fuse as it's part of the RAM and I doubt it's powered separately... wouldn't make sense.

[Encanto]

Originally Posted by adr_bimmer

Was wondering what would happen if I connected the Match UP 7DSP to their pp-iso cable with no external battery connection? As I have already the Match pp62dsp installed and I’d like to basically just swap them out for like 5 min to have a listen without actually grab cables from battery. I have the base sound system btw. Thanks

Understand that the PP62DSP current draw is about 20A, and the UP 7DSP is about 50A, and this current is being drawn thru the OEM RAM wiring which is rated to up to 20A in the base system.

The reason of connecting these amps directly to the battery is not to mess up the OEM wiring when the amp draw current in excess of the OEM wiring capacity.