03-23-2020, 02:03 PM | #1 |
Private First Class
71
Rep 101
Posts |
Any installed a Front Lip spoiler from Ikon Motorsports?
I purchased the carbon fiber lip from Ikon Motorsports for my G20 but the holes on the lip spoiler are too large to use the existing plugs on my bumper.
Hoping someone has installed this lip before and has some recommendations. Thanks! |
03-25-2020, 05:37 AM | #2 |
Captain
289
Rep 829
Posts |
With my lip spoiler I used the large holes to line the spoiler up over the existing plugs then put self-taping screws through the small holes. All was fine.
|
Appreciate
0
|
03-25-2020, 08:14 AM | #3 |
Private First Class
71
Rep 101
Posts |
|
Appreciate
0
|
03-25-2020, 09:15 AM | #4 |
Private First Class
67
Rep 105
Posts |
The large holes are there to make space for the existing plastic rivets under the bumper. You only need to remove the 6 (three on each side) 10mm bolt head screws under the bumper. Hold the spoiler in position and then screw them back in.
|
Appreciate
0
|
03-25-2020, 09:20 AM | #5 |
New Member
11
Rep 28
Posts |
I actually just installed mine yesterday, but there are 3 screws that BMW used for the underpans that you are supposed to take out. The holes on the IKON front lip lines up with these screws. The larger holes are there for the plastic push pins.
I have attached pics of the factory BMW screws I am talking about. There is also a video if you look for it on youtube of another forum member who did a DIY front lip G20. For the middle part of the lip, you do need to drill 4 holes with some self tapping screws. Overall impressions is that I like how the front looks with the lip more so than without. However, I do think that the fitment can be better. It needs to come more towards the side so it wraps around the wheel arch. Also I know I can't compare a $160 lip to the factory M performance one but definitely see where Ikon cut cost. Below the wheel arch the BMW one is solid so you can't see in but the Ikon lip is exposed. Please excused my dirty car. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|