Anti-dazzle coding on Laser?

rico25 · 02-06-2022, 12:29 PM

Quote:

Originally Posted by kubax86

Can be done remotely then

Any recommendations? Thanks

Almaretto · 02-06-2022, 09:22 PM

Quote:

Originally Posted by rico25

I'm not in Toronto.. I'm in Calgary!

I code them all the time locally and remotely.

rico25 · 02-06-2022, 10:24 PM

Quote:

Originally Posted by Almaretto

I code them all the time locally and remotely.

Thanks! Can you do it for me please

Mtneerz · 02-07-2022, 07:38 PM

I had my 2022 M340i with Laser lights coded for the anti-dazzle tonight! I worked with Ben from RG Sport to have it done remotely. I was sweating it for a while though. He was mid way through and had an error that was likely due to my ancient laptop. Ben stuck with it though and loaded the software directly on my PC and ended up getting it coded.

I took it out for a quick ride and it works great. It cuts a tunnel of low beam around cars as I approach from behind and I could clearly see the shifting of the beam as oncoming cars came toward me.

Overall for $99 and a bit of butt pucker over the fear that I just screwed my car up with less than 1000 miles on it, it was worth it.

Almaretto · 02-08-2022, 05:01 PM

Quote:

Originally Posted by rico25

Thanks! Can you do it for me please

Sent PM to coordinate. Yes, I can code.

UnknownBeing · 02-15-2022, 05:29 PM

It looks like the final approval for glare-free high beams have their final approval.

It looks like BMW enabled these for the Canadian market with a software update. Think they'll do the same for the US market?

stvding · 02-15-2022, 05:30 PM

Quote:

Originally Posted by UnknownBeing

It looks like the final approval for glare-free high beams have their final approval.

It looks like BMW enabled these for the Canadian market with a software update. Think they'll do the same for the US market?

Software update in Canada? OTA or dealer install ??

UnknownBeing · 02-15-2022, 05:41 PM

Quote:

Originally Posted by stvding

Software update in Canada? OTA or dealer install ??

Maybe I misread. Post 273 says it was enabled at some point, but that may be based off build date, not software version.

larrylam646 · 02-15-2022, 07:08 PM

Quote:

Originally Posted by UnknownBeing

Maybe I misread. Post 273 says it was enabled at some point, but that may be based off build date, not software version.

That was me.... I assumed Canadian 2021 model year did not include 5AP in their VO after reading:

1) Item 4.12 in the attached Release Notes Programming Passenger Cars, ISTA 4.26.3x.
2) BMW offering a retrofit service - https://www.bmw.ca/en/topics/offers-...eadlights.html

I now know my assumption is wrong since 2022 still included 5AP in their VO.

kubax86 · 02-16-2022, 08:08 AM

Quote:

Originally Posted by rico25

Any recommendations? Thanks

Of course…
I provide worldwide remote coding services

hdahman · 02-16-2022, 10:41 AM

so we don't need to code it anymore? we should get an OTA to fix it?

Almaretto · 03-02-2022, 01:39 AM

Quote:

Originally Posted by hdahman

so we don't need to code it anymore? we should get an OTA to fix it?

Looks like more investigation is needed to determine whether headlights on current vehicles "lights meet NHTSA standards and whether they can be activated in the future."

So, it is unclear, if, how, and when current models will be updated.

UnknownBeing · 03-13-2022, 03:29 PM

What are the "extra" codes that need to be performed to improve performance?

These are high-level steps I plan to perform on my 22 M340i.

Remove 5AP from VO
Code BDC_BODY3, HU_MGU, FML (both of them), KAFAS4
Change the following in KAFAS4 via FDL coding:
- COUNTRY_VARIATION Europe_RC [01]
- C_FLA_BS_ENTER_THRESH Rest of world [03]
- C_FLA_BS_EXIT_THRESH: Rest of world [02]

Not sure if this the last step is needed, found that on the G05 forum to impove how the antidazzle works.

smithf80 · 03-17-2022, 08:59 AM

I don't have working ESys anymore, all of my coding was back in the F-Series days, but want to get this taken care of on my 2022 G20.

Can I just use ESys and an old launcher to do the VO coding, and then take care of the FDL coding using Bimmercode? I assume not having access to translated CAF doesn't matter if you're only VO coding, no?

kubax86 · 03-17-2022, 01:05 PM

Quote:

Originally Posted by smithf80

I don't have working ESys anymore, all of my coding was back in the F-Series days, but want to get this taken care of on my 2022 G20.

Can I just use ESys and an old launcher to do the VO coding, and then take care of the FDL coding using Bimmercode? I assume not having access to translated CAF doesn't matter if you're only VO coding, no?

Yes, you can

Almaretto · 03-17-2022, 01:28 PM

Quote:

Originally Posted by smithf80

I don't have working ESys anymore, all of my coding was back in the F-Series days, but want to get this taken care of on my 2022 G20.

Can I just use ESys and an old launcher to do the VO coding, and then take care of the FDL coding using Bimmercode? I assume not having access to translated CAF doesn't matter if you're only VO coding, no?

I am not sure that Bimmercode has access to all the modules to FDL code.

zazzau · 03-17-2022, 04:12 PM

Quote:

Originally Posted by smithf80

I don't have working ESys anymore, all of my coding was back in the F-Series days, but want to get this taken care of on my 2022 G20.

Can I just use ESys and an old launcher to do the VO coding, and then take care of the FDL coding using Bimmercode? I assume not having access to translated CAF doesn't matter if you're only VO coding, no?

Totally depends on what you are trying to code. Bimmercode doesn't have all the ECU modules for FDL coding.

zazzau · 03-17-2022, 04:14 PM

Quote:

Originally Posted by UnknownBeing

What are the "extra" codes that need to be performed to improve performance?

These are high-level steps I plan to perform on my 22 M340i.

Remove 5AP from VO
Code BDC_BODY3, HU_MGU, FML (both of them), KAFAS4
Change the following in KAFAS4 via FDL coding:
- COUNTRY_VARIATION Europe_RC [01]
- C_FLA_BS_ENTER_THRESH Rest of world [03]
- C_FLA_BS_EXIT_THRESH: Rest of world [02]

Not sure if this the last step is needed, found that on the G05 forum to impove how the antidazzle works.

This has already been covered on this thread

Restrected · 03-22-2022, 09:31 PM

I apologize for being a complete noob but i have my coding setup ready and it does code properly. What do i do? i have a 2020 330i. when you turn on the car the lights self level so i am assuming i can enable this?

RichieDirts · 03-25-2022, 10:23 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by smithf80

I don't have working ESys anymore, all of my coding was back in the F-Series days, but want to get this taken care of on my 2022 G20.

Can I just use ESys and an old launcher to do the VO coding, and then take care of the FDL coding using Bimmercode? I assume not having access to translated CAF doesn't matter if you're only VO coding, no?

I am not sure that Bimmercode has access to all the modules to FDL code.

Hey could you send me a PM about coding my laserlights? Your mailbox is full and I can't send you a PM. Just got the car today and want this done. Thank you in advance

Almaretto · 03-26-2022, 02:49 AM

Quote:

Originally Posted by RichieDirts

Hey could you send me a PM about coding my laserlights? Your mailbox is full and I can't send you a PM. Just got the car today and want this done. Thank you in advance

Hey. Been away from the forms for a couple weeks. Inbox cleared.

Almaretto · 03-28-2022, 12:35 AM

Quote:

Originally Posted by Restrected

I apologize for being a complete noob but i have my coding setup ready and it does code properly. What do i do? i have a 2020 330i. when you turn on the car the lights self level so i am assuming i can enable this?

Whether you can enable, depends on two things - current vehicle packages and knowledge of coding.

02-07-2022, 07:38 PM	#290
Mtneerz New Member 8 Rep 5 Posts Drives: 22’ BMW M340i Join Date: Jan 2022 Location: Harrisburg, PA iTrader: (0)	I had my 2022 M340i with Laser lights coded for the anti-dazzle tonight! I worked with Ben from RG Sport to have it done remotely. I was sweating it for a while though. He was mid way through and had an error that was likely due to my ancient laptop. Ben stuck with it though and loaded the software directly on my PC and ended up getting it coded. I took it out for a quick ride and it works great. It cuts a tunnel of low beam around cars as I approach from behind and I could clearly see the shifting of the beam as oncoming cars came toward me. Overall for $99 and a bit of butt pucker over the fear that I just screwed my car up with less than 1000 miles on it, it was worth it.
	Appreciate 0 Quote

02-15-2022, 05:29 PM	#292
UnknownBeing Second Lieutenant 132 Rep 248 Posts Drives: 16 340i (22 M340i in-transit) Join Date: Aug 2016 Location: New England iTrader: (1)	It looks like the final approval for glare-free high beams have their final approval. It looks like BMW enabled these for the Canadian market with a software update. Think they'll do the same for the US market?
	Appreciate 0 Quote

02-16-2022, 10:41 AM	#297
hdahman Lieutenant 237 Rep 432 Posts Drives: BMW X5MC Join Date: Apr 2020 Location: NJ&QC iTrader: (0)	so we don't need to code it anymore? we should get an OTA to fix it?
	Appreciate 0 Quote

03-13-2022, 03:29 PM	#299
UnknownBeing Second Lieutenant 132 Rep 248 Posts Drives: 16 340i (22 M340i in-transit) Join Date: Aug 2016 Location: New England iTrader: (1)	What are the "extra" codes that need to be performed to improve performance? These are high-level steps I plan to perform on my 22 M340i. Remove 5AP from VO Code BDC_BODY3, HU_MGU, FML (both of them), KAFAS4 Change the following in KAFAS4 via FDL coding: COUNTRY_VARIATION Europe_RC [01] C_FLA_BS_ENTER_THRESH Rest of world [03] C_FLA_BS_EXIT_THRESH: Rest of world [02] Not sure if this the last step is needed, found that on the G05 forum to impove how the antidazzle works.
	Appreciate 0 Quote

03-17-2022, 08:59 AM	#300
smithf80 Major General 2809 Rep 5,316 Posts Drives: G80 M3 6MT Join Date: Mar 2014 Location: Long Island, NY iTrader: (1) Garage List 2022 G20 330i [9.00] 2018 F80 M3 [9.75]	I don't have working ESys anymore, all of my coding was back in the F-Series days, but want to get this taken care of on my 2022 G20. Can I just use ESys and an old launcher to do the VO coding, and then take care of the FDL coding using Bimmercode? I assume not having access to translated CAF doesn't matter if you're only VO coding, no? __________________ Scott, Partner Insight Automotive Consulting Click HERE for all discounted BMW New Car Pricing Click HERE for all BMW In Stock Inventory Specials Call/Text: 516-416-5481 Email: scott@insightautoconsulting.com
	Appreciate 0 Quote

03-22-2022, 09:31 PM	#305
Restrected New Member 0 Rep 7 Posts Drives: BMW 330I Join Date: Mar 2022 Location: New York iTrader: (0)	I apologize for being a complete noob but i have my coding setup ready and it does code properly. What do i do? i have a 2020 330i. when you turn on the car the lights self level so i am assuming i can enable this?
	Appreciate 0 Quote