[Harithh.a]

Hello,

I have a 2023 M340i. Previously on my F30 I had HRE FF04. My fronts were 19x9 et 25 wrapped in a 245/35/19. My rears were 19x10 et 33 wrapped in a 275/30/19.

I was looking at adapter to make them fit on the G20 because I love the wheels and I found a an adapter that converts the 5x112 to a 5x120 w a CB 72.6 from the 66.5. The problem is it is a 18mm spacer. Would my wheels fit on the G20 or would it poke too much? I am also planning on putting H&R springs. From the math I did and the search I conducted there’s absolutely no way they’d fit without poking a lot.

Just wanted to double check with y’all before I decide to sell.

Thank you

[G22b58]

Sell.

[RTPenland]

Originally Posted by Harithh.a

Hello,

I have a 2023 M340i. Previously on my F30 I had HRE FF04. My fronts were 19x9 et 25 wrapped in a 245/35/19. My rears were 19x10 et 33 wrapped in a 275/30/19.

I was looking at adapter to make them fit on the G20 because I love the wheels and I found a an adapter that converts the 5x112 to a 5x120 w a CB 72.6 from the 66.5. The problem is it is a 18mm spacer. Would my wheels fit on the G20 or would it poke too much? I am also planning on putting H&R springs. From the math I did and the search I conducted there’s absolutely no way they’d fit without poking a lot.

Just wanted to double check with y’all before I decide to sell.

Thank you

A 19x9 with an ET of 25 sits pretty darn flush on the G20. With the addition of an 18mm spacer you will be well outside of the fender and even if you liked the look of what would be nearly 3/4" of poke I think it would be virtually impossible to avoid rubbing especially with the H&R springs (which are more aggressive in drop than say a Dinan Spring)

Sooooo it's time to list them for sale. Good thing (as I'm sure you are aware) there are always buyers for HRE's

[Harithh.a]

Originally Posted by RTPenland

A 19x9 with an ET of 25 sits pretty darn flush on the G20. With the addition of an 18mm spacer you will be well outside of the fender and even if you liked the look of what would be nearly 3/4" of poke I think it would be virtually impossible to avoid rubbing especially with the H&R springs (which are more aggressive in drop than say a Dinan Spring)

Sooooo it's time to list them for sale. Good thing (as I'm sure you are aware) there are always buyers for HRE's

I figured. Well, it’s sad to see them go, but thank you for your help.

[RTPenland]

Originally Posted by Harithh.a

I figured. Well, it’s sad to see them go, but thank you for your help.

You're welcome, looking forward to seeing what you choose for new wheels