[Joe-BMW33]

Originally Posted by tomto147

In my case it remembers the last setting without any coding. But you need to turn it on while the headlight are also on. Then the next day when it gets dark and automatic lights are on then together with auto high beam assist.

Thanks, what year don you have? This isn't the case for me. I turn it on of course at night when the headlights are on. If I shut down the car, it's off by default.

[hanselfransel]

How can this work "TCM_MSA_Memory" My 11.20 330d does not have the physical Button for MSA on off anymore, like my old F30, its allways off.

If you set another coding like MSA complete off, i ll get an errorcode in ista from MSA, it works, but don tlike to have the error in the car

[tomto147]

Originally Posted by Joe-BMW33

Thanks, what year don you have? This isn't the case for me. I turn it on of course at night when the headlights are on. If I shut down the car, it's off by default.

2020

[phayze]

Hi,

Can i check with you, what is the coding to turn off MSA?

Originally Posted by hanselfransel

How can this work "TCM_MSA_Memory" My 11.20 330d does not have the physical Button for MSA on off anymore, like my old F30, its allways off.

If you set another coding like MSA complete off, i ll get an errorcode in ista from MSA, it works, but don tlike to have the error in the car

[35MGR]

how can I code signal lights always open mode same as picture (with bimmercode)? for headlights rear stop lights and mirror signal lights.
sorry, I don't know the name of this option

[Voodoo_G80]

Does anyone know how to change brightness of low beams?? Mine were accidentally coded to be really bright I need it back to factory setting. Please help me out!

[zazzau]

Originally Posted by Orange_m340i

Does anyone know how to change brightness of low beams?? Mine were accidentally coded to be really bright I need it back to factory setting. Please help me out!

From everything I've read on this forum it's not possible to make the lights any brighter. This is the first time I've heard. Perhaps the voltage parameters were changed? Worst case scenario is to revert back to the original FA and code the ECU.

[korvinc]

Does anyone knows how to enable TLA feature in G22 2021?

[Jeffola]

About to jump in to this, I had previously coded my Ford's in a similar manner. Can we code the fog lights to always come on with low beams (Every time the lights go on, there is no "memory" of the fog lights being on.

its silly, but most of this is just for fun, right?

[nwg20]

Bought Bimmercode and coded for the first time today...sport + and the 5 click turn signal. WOW sport + mode made a huge difference.

Probably dumb question...I see some people changing their BMW chime to the Rolls Royce chime. Is the chime from older BMWs still in the system anywhere? The new one is nice but I really miss the e90 chime.

[helmet91]

Bimmercode for iOS downloaded an update for me last night... I can't seem to find release note anywhere.

Anyone know what's new??

[VertigoAtHome]

Can you adjust the volume for the turn signal and warning chimes using Bimmercode on a G05? I've already set them at the minimum via the settings/sound menu but they are still loud since I installed an aftermarket amplifier.

[Bodybimmer83]

Originally Posted by andy5468

I have added the below using Bimmercode Beta in standard mode on a UK spec car running BMW 07/20.54 software.

I have to keep a list as I need to re code the car each time I download the latest BMW software update as it wipes most of this coding and I have to start again.

Coding is done at your own risk. You need the correct software version and modules on the car for all coding to work correctly. All codes work on my car, but it is possible to cause serious damage to the car particularly in "expert mode".

Head Unit MGU
Remove legal disclaimers
M start up animation in I drive
Video in Motion enable
Radio 50% at start up
Tyre pressure & temperature both displayed
Front DRL check box added in I drive
Body Domain Controller BDC
Start car in adaptive mode
Light / rain sensor insensitive
Turn off passenger mirror tilt in reverse
Rear LEDS on with front DRL's
Boot opening delay to 1 second
No horn when locking car with engine running
Window lifter interuption when opening door - removed
Advanced Crash Module ACSM
Remove seat belt chimes driver and passenger
Change rear view camera to 50km and 50m
Engine Control Unit DME
Air con memory remember last setting
Air con auto settings used in manual mode
Instrument Cluster DKOMBI
Alpina dash layout
Powertailgate Module HKFM
Close tailgate without long press on remote

I added the below in expert mode

Enable Sport + function & Comfort + functions
Expert mode
Body Domain Controller - BDC
3221 PfFesMaster > fes > Change FesSportWorldMode1 to SportExpert (Default should be Non sport expert).
“3221 PfFesMaster” > fes > comfort plus > Comfort Plus

Enable sport + & comfort + options in the I drive menu
Expert mode
Headunit - MGU
3008 > Fes_sport_Expert > Change nicht aktiv to aktiv for sport +
3008 > Fes_Comfort_Plus and change it to aktiv for comfort +

Enable Auto Steering Wheel heat option in I drive
Expert mode
Headunit - MGU
3000 HMI SPEECH > AKT_Auto_Lenkradheizung > aktiv

Enable Auto Steering Wheel heat function
Body Domain Controller - BDC
3142 PfLinLRE > LHZ_ CCM_IKF > aktiv
3450 Others 1 > IKF_ENABLE: ikf_alle_sitze

Enable Rear Camera Zoom (Towbar)
Expert mode
Headunit – MGU
300B Parken- Macro_trailer_coupling > active.

Enable Bowers & Wilkins HI FI & Equaliser
Expert mode
Headunit - MGU
3002 - Audio Broadcast – Audio System then change the parameters from alev3-Ram to alev4-Ram code

Ambient light colours were then changed in expert mode with an additional instruction sheet which I have.

I have the stock speakers. Because of that I don’t have the EQ settings.
My question is if I enable the EQ settings, will they actually show up and work? If so, that’s amazing!

[VipinLJ]

Originally Posted by Bodybimmer83

I have the stock speakers. Because of that I don’t have the EQ settings.
My question is if I enable the EQ settings, will they actually show up and work? If so, that’s amazing!

The EQ will show up but nothing will happen with the base HiFi system. You need the HK system for it to work.

[Jamers2021]

Any way to enable the turn signals being display in the HUD? I saw a video where this was done on a different model BMW.

https://www.youtube.com/watch?v=hTWRxueFqtc

[g20_shub]

Originally Posted by andy5468

I have added the below using Bimmercode Beta in standard mode on a UK spec car running BMW 07/20.54 software.

I have to keep a list as I need to re code the car each time I download the latest BMW software update as it wipes most of this coding and I have to start again.

Coding is done at your own risk. You need the correct software version and modules on the car for all coding to work correctly. All codes work on my car, but it is possible to cause serious damage to the car particularly in "expert mode".

Head Unit MGU
Remove legal disclaimers
M start up animation in I drive
Video in Motion enable
Radio 50% at start up
Tyre pressure & temperature both displayed
Front DRL check box added in I drive
Body Domain Controller BDC
Start car in adaptive mode
Light / rain sensor insensitive
Turn off passenger mirror tilt in reverse
Rear LEDS on with front DRL's
Boot opening delay to 1 second
No horn when locking car with engine running
Window lifter interuption when opening door - removed
Advanced Crash Module ACSM
Remove seat belt chimes driver and passenger
Change rear view camera to 50km and 50m
Engine Control Unit DME
Air con memory remember last setting
Air con auto settings used in manual mode
Instrument Cluster DKOMBI
Alpina dash layout
Powertailgate Module HKFM
Close tailgate without long press on remote

I added the below in expert mode

Enable Sport + function & Comfort + functions
Expert mode
Body Domain Controller - BDC
3221 PfFesMaster > fes > Change FesSportWorldMode1 to SportExpert (Default should be Non sport expert).
"3221 PfFesMaster" > fes > comfort plus > Comfort Plus

Enable sport + & comfort + options in the I drive menu
Expert mode
Headunit - MGU
3008 > Fes_sport_Expert > Change nicht aktiv to aktiv for sport +
3008 > Fes_Comfort_Plus and change it to aktiv for comfort +

Enable Auto Steering Wheel heat option in I drive
Expert mode
Headunit - MGU
3000 HMI SPEECH > AKT_Auto_Lenkradheizung > aktiv

Enable Auto Steering Wheel heat function
Body Domain Controller - BDC
3142 PfLinLRE > LHZ_ CCM_IKF > aktiv
3450 Others 1 > IKF_ENABLE: ikf_alle_sitze

Enable Rear Camera Zoom (Towbar)
Expert mode
Headunit – MGU
300B Parken- Macro_trailer_coupling > active.

Enable Bowers & Wilkins HI FI & Equaliser
Expert mode
Headunit - MGU
3002 - Audio Broadcast – Audio System then change the parameters from alev3-Ram to alev4-Ram code

Ambient light colours were then changed in expert mode with an additional instruction sheet which I have.

Hey I was wondering if you can share the ambient colors sheet ? Also thank you for the information above. Appreciate it

[Impalaalex@gmail.com]

Originally Posted by pneumodoc

Sport+
1. BDC -> Expert -> 3221 PfFesMaster -> FesSportWorldMode1 -> SportExpert -> Code
2. MGU ->FES_SPORT_EXPERT -> aktiv

Auto Steering Heat
1. MGU->AKT_Auto_Lenkrad-> aktiv
2. BDC->LHZ_CCM_IKF-> aktivIKF_EN
3. BDC->IKF_ENABLE: ikf_alle_size

Wireless Charging
1. BDC -> WcaWirelessChargingAblage-> WCA_ENABLE -> aktiv
3. HU_MGU -> 3000 HMI_SPEECH -> WCA -> aktiv

Rear DRL
1. HU_MGU->HMI_SPEECH->DAYDRIVING_LIGHT_REAR->aktiv
2. BDC in Expert Mode > 3702LicFeatures->Feature_4 ->activ

can i use bimmercode to code new FEM for lighting module?

[Impalaalex@gmail.com]

i have bimmercode cheap, can i use expert to code lighting system instead of esys? central locking is down and headlights/taillights are on unless i unplug FEM

[samcrooks182]

Originally Posted by RSnic

Hi,

I have been following this thread and finally got around to converting my Excel spreadsheet that I use to PDF format so I could post.

The codes are an accumulation of functions I have discovered and what I have picked up from this sub-forum (thanks to all of the terrific contributors), as well as some that came over from my previous F30.

Believe you can use either Bimmercode or E-Sys (with either E-SysX or ProLauncher -- which is somewhat dated); the only exception is the SAS module which you can not code with Bimmercode

Hope this help!

Hi, could you tell me what the Lane change assist function does exactly and is it configurable on any car? Or does it need to have driver assistant pro installed?

Thanks!

Sam

[RSnic]

samcrooks182,

To use Active Lane Change Assistant, not only do you need to code your car as per cheatsheet, but your car needs to have Active Cruise Control (believe it's part of Driving Assistant Pro, S5AUA).

Having said that, it is a great feature on highways (Motorways), particularly on trips. With ACC engaged, to change lanes, you pull your turn signal stalk in the direction you want to go almost to the midpoint of turn stalk, just short of stalk lock/click point. An arrow shows up in center of instrument cluster (and in HUD, if equipped); the car will then change lanes automatically when it's safe.

As I said, I find it particularly useful on highways

Hope that helps!

[PLF69]

Originally Posted by RSnic

samcrooks182,

To use Active Lane Change Assistant, not only do you need to code your car as per cheatsheet, but your car needs to have Active Cruise Control (believe it's part of Driving Assistant Pro, S5AUA).

Having said that, it is a great feature on highways (Motorways), particularly on trips. With ACC engaged, to change lanes, you pull your turn signal stalk in the direction you want to go almost to the midpoint of turn stalk, just short of stalk lock/click point. An arrow shows up in center of instrument cluster (and in HUD, if equipped); the car will then change lanes automatically when it's safe.

As I said, I find it particularly useful on highways

Hope that helps!

I drove a X5 with this feature and found it brilliant.

I only have bimmercode, do you guys know someone who could remote code this on my car ?

[senderhomes]

Wait you can code wireless charging now?

Originally Posted by pneumodoc

Sport+
1. BDC -> Expert -> 3221 PfFesMaster -> FesSportWorldMode1 -> SportExpert -> Code
2. MGU ->FES_SPORT_EXPERT -> aktiv

Auto Steering Heat
1. MGU->AKT_Auto_Lenkrad-> aktiv
2. BDC->LHZ_CCM_IKF-> aktivIKF_EN
3. BDC->IKF_ENABLE: ikf_alle_size

Wireless Charging
1. BDC -> WcaWirelessChargingAblage-> WCA_ENABLE -> aktiv
3. HU_MGU -> 3000 HMI_SPEECH -> WCA -> aktiv


Wait you can code wireless charging ?
Rear DRL
1. HU_MGU->HMI_SPEECH->DAYDRIVING_LIGHT_REAR->aktiv
2. BDC in Expert Mode > 3702LicFeatures->Feature_4 ->activ