[b58.ha]

I recently ordered Rohana RFX 10 wheels, 19x8.5 +25 offset for fronts and 19x9.5 +35 offset for rear. Would I have any issues with that or need to include spacers at all? The tires I have for front are 225/40/19 and the rears are 255/35/19. I plan to put these on my 2020 M340i X-Drive

[Ronan703]

Originally Posted by bakafish88

Apex VS-5RS 19x9" ET25 Motorsport Gold
Square setup 255/35/R19 Michelin Pilot Sport All Season 4
2023 M340i xDrive Brooklyn Grey

Flawless. How do you like the tires?

[MOTO]

Sneak peek...350 miles on the '24 and already getting pretty deep in the mods, lol. I can't leave anything alone.

Picked up the car today on the Dinan springs/supplemental ride quality kit. While it's not bad, anyone who says "it's like stock", doesn't seem to remember quite how their stock car felt. Admittedly, it's a "good" ride for a lowered on springs car and while I prefer the look and stance, I miss the bad/uneven pavement mitigating stock ride already. I'm sure I'll get used to it but I digress...

I also got word the new wheels are done and shipping...sweet! I went with some custom B Forged -- specs of 19x9 ET25 and 19x10 ET38. I'm planning on running 255/35-19 and 275/35-19.

I will post up some finished pics when the wheels are on the car.

[ad111]

my wheels running ps4s on hre ff10

[bakafish88]

Originally Posted by Ronan703

Flawless. How do you like the tires?

Great so far, much better than the rft.

[AR_Motorwerkz]

BBS G20 on BBS LM-R in Full polished finish

[j2dad5389]

Originally Posted by xnick101

OEM 19" Supra wheels. Lowered on H&R Springs

Front Michelin PSS 255/35 with a 13mm spacer
Rear Michelin PS4S 275/35 No spacer

What lip is this?

[pdxtiger]

Originally Posted by AR_Motorwerkz

BBS G20 on BBS LM-R in Full polished finish

Sizes?

[JunesM340IX]

2021 M340I XDRIVE W/Adaptive M Suspension Cleared thicker electronic shocks, M Performance 18' retrofit bbk cleared larger front caliper and larger rotor. Lowered on Dinan w/handling kit W/specific camber and alignment specs from Dinan (bump stops all 4 corners). ZERO RUBBING, NO VIBRATIONS, NO SPACERS
**** some of the pictures are with stock suspension and a couple with the lowered suspension******

20X9 ET 25 FRONT WITH 245/35/20
20X10.5 ET 45 REAR WITH 275/30/20

I have to thank Tom O VIBE Motorsports for helping me get the right specs for my particular set up.

[VIBE Motorsports]

Originally Posted by JunesM340IX

2021 M340I XDRIVE W/Adaptive M Suspension Cleared thicker electronic shocks, M Performance 18' retrofit bbk cleared larger front caliper and larger rotor. Lowered on Dinan w/handling kit W/specific camber and alignment specs from Dinan (bump stops all 4 corners). ZERO RUBBING, NO VIBRATIONS, NO SPACERS
**** some of the pictures are with stock suspension and a couple with the lowered suspension******

20X9 ET 25 FRONT WITH 245/35/20
20X10.5 ET 45 REAR WITH 275/30/20

I have to thank Tom O VIBE Motorsports for helping me get the right specs for my particular set up.

Thank you for your business! The car looks amazing with those wheels!

[felibon]

Originally Posted by Vancouver_M440

I am super happy with my new shoes for my G22 M440i. Spent 3 weeks trying to find a design that I liked and went between multiple brands and designs and between 19s and 20s. In the end, all the best looking wheels were 20s. I know 19s would have saved me a bunch of money but I was worried I would look longingly at 20s when I saw them on other people's rides. So I settled on these Brixton Forged RF7s from Vibe Motorsports. I had an extremely smooth and enjoyable experience with them and they delivered above my expectations. Mounting was perfectly balanced and small details like black wheel weights and black TPMS valves really show their attention to detail. My factory gloss black 791M wheels had silver weights and silver valves for comparison.

Wheel specs
Front: 20x9" ET25
Rear: 20x10" ET35
Tire specs
Front: 235/35/20 diameter 26.5"
Rear: 275/30/20 diameter 26.5"

Fitment is pretty bang on with maybe a smidge more protrusion in the rear than I like, but totally acceptable. Front seems bang on to me. No rubbing at all with stock ride height. I don't know if I will do a drop or not. I chose Falkens primarily on cost and then comfort as most reviews say it's a bit more comfort oriented. I haven't gotten much seat time yet but my short drive felt only slightly harsher than the 19" P4S tires. Still trying to figure the right pressure for the tire. The BMW computer is suggesting 50 PSI for the factory 255/30/20 size which seems really high to me but I don't have that much experience with these super low profile sizes yet. Happy to hear other people suggestion on this. More pics to come when I get a chance to do a photoshoot.

Damn that looks clean! I had BF wheels on my F80 M3

Do you think 20 x 10.5 +35 will poke out too much?

[zixpt]

Hi, I'm putting together wheels for my g20 320i xdrive. Currently, winter ones are 225 45 18, all the same size. For summer custom 245 35 19 also all the same. If there is no such size on the nameplate, what should you choose in the car's computer? Leave the wheel settings as for winter ones, since the front and rear ones for 225 45 18 are the same by default, or choose special/non-standard tires?

[chrish_22]

Originally Posted by MOTO

Sneak peek...350 miles on the '24 and already getting pretty deep in the mods, lol. I can't leave anything alone.

Picked up the car today on the Dinan springs/supplemental ride quality kit. While it's not bad, anyone who says "it's like stock", doesn't seem to remember quite how their stock car felt. Admittedly, it's a "good" ride for a lowered on springs car and while I prefer the look and stance, I miss the bad/uneven pavement mitigating stock ride already. I'm sure I'll get used to it but I digress...

I also got word the new wheels are done and shipping...sweet! I went with some custom B Forged -- specs of 19x9 ET25 and 19x10 ET38. I'm planning on running 255/35-19 and 275/35-19.

I will post up some finished pics when the wheels are on the car.

That is sick! Which part of the bay are you in?

[MOTO]

[QUOTE="chrish_22;30825136"]That is sick! Which part of the bay are you in?

Thanks! I’m in the east bay.

[chrish_22]

[QUOTE=MOTO;30825894]

Originally Posted by chrish_22

That is sick! Which part of the bay are you in?

Thanks! I’m in the east bay.

There seem to be a lot of dravit LCIs in the bay haha. My gf has one; if you ever wanna shoot hit me up @t3eye, we're in San Jose!

[MOTO]

[QUOTE=chrish_22;30827707]

Originally Posted by MOTO

There seem to be a lot of dravit LCIs in the bay haha. My gf has one; if you ever wanna shoot hit me up @t3eye, we're in San Jose!

Yeah, well, I have only seen one other thus far!

I was looking for Brooklyn Gray and then saw Dravit in the parking lot...I like it better than BG now. Can't go wrong with it, but like black paint, it takes more work to keep it clean and swirl free.

Anyhow, sure thing. Thanks for the offer. Will be looking to hit up any BMW meets in the future perhaps.

[felibon]

Originally Posted by jeegunkim

VOLK Racing TE37SL in Magnesium Blue
Michelin Pilot Sport A/S 3+
Dinan Springs + Handling Kit
19x9.5 +22 | 245/35/19
19x10.5 +35 | 275/30/19

How much poke is there in the front? I'm trying to run 19 x 9.5 +35 in the front

[Tythefoodguy]

Hey I looking to purchase some work meisters and wanted to know if anyone thinks this is a perfect setup without spacers. Was also trying to figure out what disk make sense to have the perfect clearance for the stock calipers. L, A etc.

19X9+25-Front
19X10+35-Rear

[HFW003]

Originally Posted by Tythefoodguy

Hey I looking to purchase some work meisters and wanted to know if anyone thinks this is a perfect setup without spacers. Was also trying to figure out what disk make sense to have the perfect clearance for the stock calipers. L, A etc.

19X9+25-Front
19X10+35-Rear

I have +22 x 9.5 in the front and +35 x 10.5 in the rear and they are perfect.

[acudaf82]

So I ordered some Richland Forged GT3R wheels for my 2023 G26 in November. They just came in and they are stunning! The level of quality on the wheels is super impressive. The are considerably lighter than my stock OEM wheels. I also changed from staggered to a square setup as I commute a ton and want to be able to rotate my wheels.
The new setup is 19x9 ET25. I am also considering doing a new set of Michelin PS4's all season to replace the PZeros. Here is a short unboxing of one wheel and a pic of my ride. I will post an update once the are on the car.

[Tythefoodguy]

Originally Posted by g20beam

Kansei KNP 19x9.5 +22
Michelin Pilot Sport A/S 3+ 245/40r19
Lowered on H&R Sport Springs

Setup is squared, no spacers, no rub.

Approx. ~3mm between front wheels and strut.

Will get better pics when I can!

Hey man, i know you posted this two years ago but wanted to know if you ended up having any future issue with this setup performance wise. Was the brake caliper in the front ever a problem? Thank you.

[Tythefoodguy]

Originally Posted by HFW003

I have +22 x 9.5 in the front and +35 x 10.5 in the rear and they are perfect.

Do you have a photo or two of the setup? And what kind of disk for your wheels do you run? L, A? Any help would be appreciated🙏🏽🙏🏽🙏🏽