02-21-2024, 06:23 AM | #287 | |
Registered
0
Rep 1
Posts |
Quote:
|
|
Appreciate
0
|
02-21-2024, 10:58 PM | #288 |
...
935
Rep 4,326
Posts
Drives: M340
Join Date: Aug 2006
Location: Seattle, WA
|
You can use your Android. That's what I have been using. Just download the app.
__________________
2020 G20 M340 xDrive - Portimao Blue - ZDA|ZPP|ZPX|1CR|1PE|6NW|6WD
2016 F10 535i xDrive - AW - Retired 2011 E92 M3 - AW……………....ED April 29th, 2010 - Retired 2007 E92 335i -Space Gray.....ED Oct 19th, 2006 - Retired |
Appreciate
0
|
03-14-2024, 08:49 PM | #289 | |
New Member
47
Rep 23
Posts |
Quote:
My car has the 03/2023.50 version (when Bimmercode became unable to code ASS memory, rip) and I changed all of these (my unknowns were different, but the first 71 and 14 matching one I selected), but at most was able to separate the signals on the outer lights. The inner lights' light bar and reverse was working, but I wasn't getting the signals. Then after an hour of messing around to understand why it might be, I decided to search "country" under the BDC Expert Mode, and found the "VCM_COUNTRY" variable, which was set to us or usa (I don't recall exact). I changed that to "ece" and... it worked! I have no idea what it changes, but nothing else about the car seemingly changed like units. Not sure why initially it excluded the signals on the inner (trunk mounted) lights, when everything else was working. But after changing that seems that everything works. Haven't tried out the brake force thing though it is (partially?) coded. Next step is to source some EUDM tails! |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|