ESYS G20 coding - getting started

shawnsheridan · 04-08-2022, 10:47 AM

Quote:

Originally Posted by h@nsX5

Hi ALL,

Newbie here. Seeking guidance to code my F15 with the community here. Any advise is much appreciate.

Many thanks.

Your Receive PM function is disabled. PM me when working.

h@nsX5 · 04-08-2022, 01:15 PM

Quote:

Originally Posted by shawnsheridan

Your Receive PM function is disabled. PM me when working.

Thank you shawnsheridan
Already submitted 4 replies and awaiting for the approval to receive PM.

shawnsheridan · 04-08-2022, 02:03 PM

Quote:

Originally Posted by maximking

I would recommend Esys Plus 3.9

much better then cracked launchers of TM ,sold on internet

Cracked Launchers are no good for sure. But now we have BimmerUtility so need for them or another solution.

ibrahimaytu · 04-09-2022, 08:11 AM

Hello shawnsheridan , would you like to share with me E-sys and Launcher? Because I cant establish connection with 2.8.2 anymore.

Regards,

shawnsheridan · 04-09-2022, 11:23 AM

Quote:

Originally Posted by ibrahimaytu

Hello shawnsheridan , would you like to share with me E-sys and Launcher? Because I cant establish connection with 2.8.2 anymore.

Regards,

PM sent.

Daywalker007 · 04-12-2022, 11:35 AM

First off thank you to the folks that take the time to post these in depth DIY threads and those that keep contributing. I am new to coding but willing to take on the challenge and I only feel confident due to the vast number of contributions to these forums. You are true heroes and I save lots of money because of your efforts. That being said......

50 pages to read......I honestly don't have time to read through 50 pages at this time. I started with the instructions on the first post but it I am already stuck. It seems some stuff may have changed on the Esysx webpage. When I click on "get Esysx now" it takes me to a page with 2 options (EsysNext and FSC). Which one is the correct one to download?

Thanks in advance.

shawnsheridan · 04-12-2022, 11:44 AM

Quote:

Originally Posted by Daywalker007

First off thank you to the folks that take the time to post these in depth DIY threads and those that keep contributing. I am new to coding but willing to take on the challenge and I only feel confident due to the vast number of contributions to these forums. You are true heroes and I save lots of money because of your efforts. That being said......

50 pages to read......I honestly don't have time to read through 50 pages at this time. I started with the instructions on the first post but it I am already stuck. It seems some stuff may have changed on the Esysx webpage. When I click on "get Esysx now" it takes me to a page with 2 options (EsysNext and FSC). Which one is the correct one to download?

Thanks in advance.

ESysX App is no longer available, and their Cloud based replacement is in Development. Best Option now is new App called BimmerUtility. PM sent.

Daywalker007 · 04-12-2022, 12:00 PM

shawnsheridan, You are a saint!

Restrected · 04-14-2022, 01:28 PM

Hi All,

A complete noob here trying to undo some coding i did 2 years ago and now i dont remember how to undo it.

I have coded too many things in a g20 two years ago when i first got it, and now i have to take it in for service since i have a battery error.

I took it and they told me i have coded it and have to undo anything i have done before they will honor their warranty.

I remember an option where i could click on a module and reset to factory defaults. Now i cant remember how to do that. I also know that i will have a ton of dtcs if i go that route but its the quickest route instead of me trying to find out individual changes i made, and then clear dtcs.

can someone help with instructions please?

i have e-sys 3.30.1 with launcher pro 2.8.1.155

Thank you in advance!!

shawnsheridan · 04-14-2022, 02:36 PM

Quote:

Originally Posted by Restrected

Hi All,

A complete noob here trying to undo some coding i did 2 years ago and now i dont remember how to undo it.

I have coded too many things in a g20 two years ago when i first got it, and now i have to take it in for service since i have a battery error.

I took it and they told me i have coded it and have to undo anything i have done before they will honor their warranty.

I remember an option where i could click on a module and reset to factory defaults. Now i cant remember how to do that. I also know that i will have a ton of dtcs if i go that route but its the quickest route instead of me trying to find out individual changes i made, and then clear dtcs.

can someone help with instructions please?

i have e-sys 3.30.1 with launcher pro 2.8.1.155

Thank you in advance!!

Load and activate original unmodified FA, and Right-Click => Code on any ECU you want to reset coding on.

superfuel · 04-16-2022, 09:24 AM

Without going through 50 pages of info. Coupled with general BMW software updates which it appears made some of the coding irrelevant. What are the top codes worth having? Thanks!

Restrected · 04-16-2022, 02:57 PM

Quote:

Originally Posted by shawnsheridan

Load and activate original unmodified FA, and Right-Click => Code on any ECU you want to reset coding on.

Thank you!

Almaretto · 04-16-2022, 03:41 PM

Quote:

Originally Posted by superfuel

Without going through 50 pages of info. Coupled with general BMW software updates which it appears made some of the coding irrelevant. What are the top codes worth having? Thanks!

NGHB, VLD, TLA, aSLA, Assisted Driving View, remove legal disclaimers, change ambient light colors

superfuel · 04-17-2022, 08:47 AM

Quote:

Originally Posted by Almaretto

NGHB, VLD, TLA, aSLA, Assisted Driving View, remove legal disclaimers, change ambient light colors

Thank you! adding these and disabling fake engine sound too!

Jay123 · 04-19-2022, 02:30 AM

Hi, I was reading through the forum and came across ur posts. I have a 2021 bmw g20. Had a headlight swap and I'm trying to code the new headlight. But I can't read the svt for my car.
I'm using esys 2.8 not sure of the psdzdata version.
Can anyone send me a link to the latest psdzdata and which esys version to use. Any help is appreciated. Thanks..

shawnsheridan · 04-19-2022, 08:44 AM

Quote:

Originally Posted by Jay123

Hi, I was reading through the forum and came across ur posts. I have a 2021 bmw g20. Had a headlight swap and I'm trying to code the new headlight. But I can't read the svt for my car.
I'm using esys 2.8 not sure of the psdzdata version.
Can anyone send me a link to the latest psdzdata and which esys version to use. Any help is appreciated. Thanks..

I replied to your same PM.

AtticusHoy · 04-20-2022, 05:00 AM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by Daywalker007

First off thank you to the folks that take the time to post these in depth DIY threads and those that keep contributing. I am new to coding but willing to take on the challenge and I only feel confident due to the vast number of contributions to these forums. You are true heroes and I save lots of money because of your efforts. That being said......

50 pages to read......I honestly don't have time to read through 50 pages at this time. I started with the instructions on the first post but it I am already stuck. It seems some stuff may have changed on the Esysx webpage. When I click on "get Esysx now" it takes me to a page with 2 options (EsysNext and FSC). Which one is the correct one to download?

Thanks in advance.

ESysX App is no longer available, and their Cloud based replacement is in Development. Best Option now is new App called BimmerUtility. PM sent.

Can I have the latest info too? Thanks!

shawnsheridan · 04-20-2022, 08:13 AM

Quote:

Originally Posted by AtticusHoy

Can I have the latest info too? Thanks!

PM sent.

akiriik · 04-20-2022, 08:29 AM

Quote:

Originally Posted by AtticusHoy

Can I have the latest info too? Thanks!

Same here

shawnsheridan · 04-20-2022, 10:39 AM

Quote:

Originally Posted by akiriik

Same here

Your Receive PM function is disabled. PM me when working.

pedro_no1 · 04-23-2022, 04:58 AM

Hello !

I have my G20 330d M Sport 07/2019 - Please, what software I need to use in order to do some simple coding ( it seems that there are several utilities, some expired and others that do not work properly for the G series ) ... I have ENET cable and Asus Laptop with Windows 11 Home x64 !

Thank you very much in advanced !

shawnsheridan · 04-23-2022, 09:50 AM

Quote:

Originally Posted by pedro_nr1

Hello !

I have my G20 330d M Sport 07/2019 - Please, what software I need to use in order to do some simple coding ( it seems that there are several utilities, some expired and others that do not work properly for the G series ) ... I have ENET cable and Asus Laptop with Windows 11 Home x64 !

Thank you very much in advanced !

PM sent.

04-09-2022, 08:11 AM	#1082
ibrahimaytu New Member 6 Rep 8 Posts Drives: BMW 2 GranCoupe Join Date: Jan 2021 Location: Istanbul iTrader: (0)	Launcher 2.8.2 Hello shawnsheridan , would you like to share with me E-sys and Launcher? Because I cant establish connection with 2.8.2 anymore. Regards,
	Appreciate 0 Quote

04-12-2022, 11:35 AM	#1084
Daywalker007 Private 33 Rep 84 Posts Drives: 2022 M340i Xdrive Join Date: Oct 2021 Location: Germany iTrader: (0)	First off thank you to the folks that take the time to post these in depth DIY threads and those that keep contributing. I am new to coding but willing to take on the challenge and I only feel confident due to the vast number of contributions to these forums. You are true heroes and I save lots of money because of your efforts. That being said...... 50 pages to read......I honestly don't have time to read through 50 pages at this time. I started with the instructions on the first post but it I am already stuck. It seems some stuff may have changed on the Esysx webpage. When I click on "get Esysx now" it takes me to a page with 2 options (EsysNext and FSC). Which one is the correct one to download? Thanks in advance.
	Appreciate 0 Quote

04-12-2022, 12:00 PM	#1086
Daywalker007 Private 33 Rep 84 Posts Drives: 2022 M340i Xdrive Join Date: Oct 2021 Location: Germany iTrader: (0)	shawnsheridan, You are a saint!
	Appreciate 0 Quote

04-14-2022, 01:28 PM	#1087
Restrected New Member 0 Rep 7 Posts Drives: BMW 330I Join Date: Mar 2022 Location: New York iTrader: (0)	Hi All, A complete noob here trying to undo some coding i did 2 years ago and now i dont remember how to undo it. I have coded too many things in a g20 two years ago when i first got it, and now i have to take it in for service since i have a battery error. I took it and they told me i have coded it and have to undo anything i have done before they will honor their warranty. I remember an option where i could click on a module and reset to factory defaults. Now i cant remember how to do that. I also know that i will have a ton of dtcs if i go that route but its the quickest route instead of me trying to find out individual changes i made, and then clear dtcs. can someone help with instructions please? i have e-sys 3.30.1 with launcher pro 2.8.1.155 Thank you in advance!!
	Appreciate 0 Quote

04-16-2022, 09:24 AM	#1089
superfuel Enlisted Member 23 Rep 47 Posts Drives: 2020 M340i xDrive Join Date: Apr 2022 Location: NorthEast iTrader: (0)	Without going through 50 pages of info. Coupled with general BMW software updates which it appears made some of the coding irrelevant. What are the top codes worth having? Thanks!
	Appreciate 0 Quote

04-19-2022, 02:30 AM	#1093
Jay123 Registered 0 Rep 2 Posts Drives: bmw f20 Join Date: Jul 2020 Location: London iTrader: (0)	Hi, I was reading through the forum and came across ur posts. I have a 2021 bmw g20. Had a headlight swap and I'm trying to code the new headlight. But I can't read the svt for my car. I'm using esys 2.8 not sure of the psdzdata version. Can anyone send me a link to the latest psdzdata and which esys version to use. Any help is appreciated. Thanks..
	Appreciate 0 Quote

04-23-2022, 04:58 AM	#1099
pedro_no1 Private 19 Rep 52 Posts Drives: BMW G20 330d M Sport Join Date: Sep 2019 Location: Paris, France iTrader: (0)	Hello ! I have my G20 330d M Sport 07/2019 - Please, what software I need to use in order to do some simple coding ( it seems that there are several utilities, some expired and others that do not work properly for the G series ) ... I have ENET cable and Asus Laptop with Windows 11 Home x64 ! Thank you very much in advanced !
	Appreciate 0 Quote