04-15-2023, 02:07 AM | #45 |
Enlisted Member
51
Rep 34
Posts |
I'm a bit confused reading this topic. The original posters guide states there are a number of screws which need removal in order to remove the mirror caps.
But then the second guide says you pop tabs with a trim tool to remove the caps. What are the screws for? Why does the second method not require those screws to be removed also? Just asking as there are a number of videos online showing techniques which either need the mirror glass removed, or it simply tilted down to expose the tab clips. But I can't recall reading about a load of screws needing removed? I have carbon M caps on order so just want to be clear on how the best approach to fitting will be!! |
Appreciate
0
|
08-25-2023, 07:41 PM | #46 | |
First Lieutenant
101
Rep 307
Posts |
Quote:
|
|
Appreciate
0
|
08-26-2023, 12:26 PM | #47 | |
First Lieutenant
101
Rep 307
Posts |
Quote:
|
|
Appreciate
0
|
09-07-2023, 12:21 PM | #48 |
Private
19
Rep 86
Posts |
I just did this today. The 4 screws release the black trim/surround at the front of your mirror. By removing them I found it much easier to release the 2 tabs shown in above post. You don’t need to remove the black trim just the screws. The second set of 2 screws need to be removed as these fix the indicator to mirror cap.
__________________
I can only please one person per day.
Today is NOT your day.... ...Tomorrow doesn't look good either! |
Appreciate
0
|
11-21-2023, 12:00 AM | #49 |
New Member
21
Rep 24
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|