BMW G80 genuine interior trim on M340i

Steve_Jr · 03-29-2021, 04:23 PM

Ordered 3 weeks ago, Some of parts were not arrived yet, but you can see how good it is. All parts are compitable but ambient has an issue around blinking effect when doors are opened. You need to turn this option off. (Door dynamic light option on setting) Enjoy !!

Here is parts no.

1. Dashboard : 51458094579
2. Center (around controller) : 51168094591
3. Cup holder cover : 51168094583
4. Edge of cup holder cover (this is not carbon, black highgrossy) : 51165A0EF81
5. Center edge trim left : 51166994076
6. Center edge trim right : 51166994077
7. Steering Y cover top (Driving assistant professional option) : 32309882895
8. Steering Y cover bottom (heating option) : 32309882893
9. Carbon shift paddle : 61319501592
.

jeegunkim · 03-30-2021, 08:51 AM

So dope. I think this is the route I will be going with as well. Did you have to do any coding to make the hardware work?

k4sh_90 · 03-30-2021, 11:53 AM

Looks dope, but easily a few grand in interior upgrades

k4sh_90 · 03-30-2021, 04:59 PM

Quote:

Originally Posted by jeegunkim

So dope. I think this is the route I will be going with as well. Did you have to do any coding to make the hardware work?

From what I remember from the F30, everything should be plug and play. Just unplug the battery when messing with the steering wheel as you have to unplug the airbag to install the paddles.

Fronttwelv · 04-04-2021, 09:44 AM

What's the over:under on this venture? $2k? $5k?

BobTheBimmer · 04-04-2021, 11:07 AM

Quote:

Originally Posted by Fronttwelv

What's the over:under on this venture? $2k? $5k?

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

OM3RTA · 04-05-2021, 03:13 PM

Quote:

Originally Posted by BobTheBimmer

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

That'll be the M Performance open pore trim by the sound of it.

330iToy · 08-22-2021, 01:43 PM

Quote:

Originally Posted by BobTheBimmer

Quote:

Originally Posted by Fronttwelv

What's the over:under on this venture? $2k? $5k?

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

I bought the M-Performance kit. My ambient lighting did not work on the front dash, footwells or cup holders. Took it off and reinstalled the old one and everything worked. Called my service manager and he said it needed to be coded. WTH makes no sense. I hope I did not get a bad m-performance panel. You can see the fiber optic cable in it. Your looks very nice. Other wise I love mine as well. My appt is Tuesday so we will see what the outcome is.

jaycrib85 · 11-13-2022, 08:39 PM

Quote:

Originally Posted by 330iToy

Quote:

Originally Posted by BobTheBimmer

Quote:

Originally Posted by Fronttwelv

What's the over:under on this venture? $2k? $5k?

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

I bought the M-Performance kit. My ambient lighting did not work on the front dash, footwells or cup holders. Took it off and reinstalled the old one and everything worked. Called my service manager and he said it needed to be coded. WTH makes no sense. I hope I did not get a bad m-performance panel. You can see the fiber optic cable in it. Your looks very nice. Other wise I love mine as well. My appt is Tuesday so we will see what the outcome is.

You ever get this sorted out? If so, what was done?

330iToy · 11-15-2022, 06:06 AM

Quote:

Originally Posted by jaycrib85

Quote:

Originally Posted by 330iToy

Quote:

Originally Posted by BobTheBimmer

Quote:

Originally Posted by Fronttwelv

What's the over:under on this venture? $2k? $5k?

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

I bought the M-Performance kit. My ambient lighting did not work on the front dash, footwells or cup holders. Took it off and reinstalled the old one and everything worked. Called my service manager and he said it needed to be coded. WTH makes no sense. I hope I did not get a bad m-performance panel. You can see the fiber optic cable in it. Your looks very nice. Other wise I love mine as well. My appt is Tuesday so we will see what the outcome is.

You ever get this sorted out? If so, what was done?

Yes, I had to get it coded by the dealer to my car for some reason. Most people it was just plug and play.

EPTXM5 · 11-22-2022, 03:08 PM

Quote:

Originally Posted by 330iToy

Quote:

Originally Posted by jaycrib85

Quote:

Originally Posted by 330iToy

Quote:

Originally Posted by BobTheBimmer

Quote:

Originally Posted by Fronttwelv

What's the over:under on this venture? $2k? $5k?

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

I bought the M-Performance kit. My ambient lighting did not work on the front dash, footwells or cup holders. Took it off and reinstalled the old one and everything worked. Called my service manager and he said it needed to be coded. WTH makes no sense. I hope I did not get a bad m-performance panel. You can see the fiber optic cable in it. Your looks very nice. Other wise I love mine as well. My appt is Tuesday so we will see what the outcome is.

You ever get this sorted out? If so, what was done?

Yes, I had to get it coded by the dealer to my car for some reason. Most people it was just plug and play.

How much was it to get coded? My light went out in my right tweeter so I bought the replacement part and still didn't work so I was also told It had to be coded by dealer for a few hundred $$.

330iToy · 11-24-2022, 07:34 AM

Quote:

Originally Posted by EPTXM5

Quote:

Originally Posted by 330iToy

Quote:

Originally Posted by jaycrib85

Quote:

Originally Posted by 330iToy

Quote:

Originally Posted by BobTheBimmer

Quote:

Originally Posted by Fronttwelv

What's the over:under on this venture? $2k? $5k?

I just finished the CF interior upgrade yesterday. All parts purchased from my local dealer. The dash and trim kit cost me 1150 cad.

Also have the cf steering wheel parts on order with a cost of 1100 cad. So all said and done about 2200 bucks Canadian for all of the carbon fiber interior bits.

No coding is required.

Side note. My cf pieces are more of a dull finished vs OP. From the pictures the cf looks glossy. Also my interior trim kit came with the black alcantara knee pieces.

I bought the M-Performance kit. My ambient lighting did not work on the front dash, footwells or cup holders. Took it off and reinstalled the old one and everything worked. Called my service manager and he said it needed to be coded. WTH makes no sense. I hope I did not get a bad m-performance panel. You can see the fiber optic cable in it. Your looks very nice. Other wise I love mine as well. My appt is Tuesday so we will see what the outcome is.

You ever get this sorted out? If so, what was done?

Yes, I had to get it coded by the dealer to my car for some reason. Most people it was just plug and play.

How much was it to get coded? My light went out in my right tweeter so I bought the replacement part and still didn't work so I was also told It had to be coded by dealer for a few hundred $$.

It was free to get mine coded. My car was not a month old and I have a great relationship with my Service Manager. I would just try to talk to them and say you heard that their are a lot of problems with them per people on the forums. Or see if they will do it on a good faith repair. I still don't know how they coded it and it worked and some people say it is a defective part.

bimmerstar · 11-25-2022, 08:24 PM

Does anyone know exactly what needs to be coded? I installed mine today and the dash does not light. I don't understand what would need to be coded, there is not brains on the panel, just LEDs. Maybe they are lin and bus needds to be reactivated or something.

B58-M340iX · 11-30-2022, 12:25 PM

What exactly is the "center edge" trim? Is that the knee pad area? I thought those were leather on the G80s. I added the black leather with gray stitching knee pads to my car. I've debated doing the G80 CF mods (don't want "M Performance" logos in my car) but the price is insanity for what it is, so I'm indifferent.

bimmerstar · 12-06-2022, 12:20 PM

As an update, i took to dealer and they coded it and it worked. Not sure what they coded or reactivated but it works now.

EPTXM5 · 12-10-2022, 10:10 PM

How
Much did they charge to code it?

freshxdough · 12-16-2022, 10:32 PM

Quote:

Originally Posted by bimmerstar

As an update, i took to dealer and they coded it and it worked. Not sure what they coded or reactivated but it works now.

The LED lights need to be “addressed”. It’s essentially an initialization so the control unit knows how many and where they are essentially. It is required when replacing LED interior lighting.

Computergeek24 · 09-08-2023, 02:06 PM

Note for anyone that stumbles on this thread like I did, coding doesn't always seem to be necessary for the ambient lighting effects to function correctly. I swapped the carbon dash piece from a 22' M4 in to my 20' M340 and it worked with no coding required. I was on the latest software update at this time.

03-29-2021, 04:23 PM	#1
Steve_Jr Second Lieutenant 457 Rep 234 Posts Drives: M340i Join Date: Jan 2012 Location: Seoul iTrader: (0) Garage List 2014 BMW 428i [0.00]	BMW G80 genuine interior trim on M340i Ordered 3 weeks ago, Some of parts were not arrived yet, but you can see how good it is. All parts are compitable but ambient has an issue around blinking effect when doors are opened. You need to turn this option off. (Door dynamic light option on setting) Enjoy !! Here is parts no. 1. Dashboard : 51458094579 2. Center (around controller) : 51168094591 3. Cup holder cover : 51168094583 4. Edge of cup holder cover (this is not carbon, black highgrossy) : 51165A0EF81 5. Center edge trim left : 51166994076 6. Center edge trim right : 51166994077 7. Steering Y cover top (Driving assistant professional option) : 32309882895 8. Steering Y cover bottom (heating option) : 32309882893 9. Carbon shift paddle : 61319501592 . Attached Images
	Appreciate 5 murderedg2089.00 hamera441.50 freshxdough3510.50 m340ninja274.50 GDBimmer44.50 Tweet Quote

03-30-2021, 08:51 AM	#2
jeegunkim Lieutenant 328 Rep 425 Posts Drives: 2020 330i xDrive, 2023 M3CX Join Date: Sep 2020 Location: Upstate NY iTrader: (0)	So dope. I think this is the route I will be going with as well. Did you have to do any coding to make the hardware work? __________________ 2020 MG 330i xDrive M Sport 2023 AR M3 Competition M xDrive
	Appreciate 0 Quote

03-30-2021, 11:53 AM	#3
k4sh_90 Captain 539 Rep 853 Posts Drives: 2020 BMW M340i xDrive Join Date: May 2019 Location: Up-Upstate NY iTrader: (0) Garage List 2020 BMW M340i xDrive [0.00]	Looks dope, but easily a few grand in interior upgrades
	Appreciate 1 Banana Clipper330.50 Quote

04-04-2021, 09:44 AM	#5
Fronttwelv First Lieutenant 148 Rep 361 Posts Drives: 14 328i xdrive msport Join Date: Feb 2014 Location: Columbus, OH iTrader: (0)	What's the over:under on this venture? $2k? $5k? __________________ Present: 2014 f30 328xi MSport, 1992 VW GTi VR6 swapped Past: 2010 335i 6 speed; 2008 VW GTi stage 2, 2004 Subie WRX FBO, 2003 20th Anny VW GTi FBO
	Appreciate 0 Quote

11-25-2022, 08:24 PM	#13
bimmerstar Second Lieutenant 149 Rep 235 Posts Drives: 2020 BMW M340xi Join Date: Aug 2022 Location: Michigan iTrader: (1)	Does anyone know exactly what needs to be coded? I installed mine today and the dash does not light. I don't understand what would need to be coded, there is not brains on the panel, just LEDs. Maybe they are lin and bus needds to be reactivated or something. __________________ 2024 G87 Zandvoort Blue M2 w/ Buckets - Stock 93\| 0-60 TBD \| 1/4 TBD \| 60-130 TBD 2020 G20 Tanzanite Blue II M340 xDrive - E30 BM3\| 0-60 3.28 \| 1/4 11.39@123 \| 60-130 9.56 Past: 2017 W205 Black C43 AMG - E40 FBO No Turbo \| 0-60 3.21 \| 1/4 11.18@124 \| 60-130 9.17
	Appreciate 0 Quote

11-30-2022, 12:25 PM	#14
B58-M340iX First Lieutenant 201 Rep 353 Posts Drives: 2021 M340i xDrive Join Date: Jun 2021 Location: USA iTrader: (0) Garage List 2021 BMW M340i xDrive [0.00]	What exactly is the "center edge" trim? Is that the knee pad area? I thought those were leather on the G80s. I added the black leather with gray stitching knee pads to my car. I've debated doing the G80 CF mods (don't want "M Performance" logos in my car) but the price is insanity for what it is, so I'm indifferent.
	Appreciate 0 Quote

12-06-2022, 12:20 PM	#15
bimmerstar Second Lieutenant 149 Rep 235 Posts Drives: 2020 BMW M340xi Join Date: Aug 2022 Location: Michigan iTrader: (1)	As an update, i took to dealer and they coded it and it worked. Not sure what they coded or reactivated but it works now. __________________ 2024 G87 Zandvoort Blue M2 w/ Buckets - Stock 93\| 0-60 TBD \| 1/4 TBD \| 60-130 TBD 2020 G20 Tanzanite Blue II M340 xDrive - E30 BM3\| 0-60 3.28 \| 1/4 11.39@123 \| 60-130 9.56 Past: 2017 W205 Black C43 AMG - E40 FBO No Turbo \| 0-60 3.21 \| 1/4 11.18@124 \| 60-130 9.17
	Appreciate 0 Quote

12-10-2022, 10:10 PM	#16
EPTXM5 Private First Class 78 Rep 184 Posts Drives: 2018 BMW M5 Join Date: Oct 2020 Location: Tx iTrader: (0)	How Much did they charge to code it?
	Appreciate 0 Quote

09-08-2023, 02:06 PM	#18
Computergeek24 New Member 2 Rep 14 Posts Drives: G20 M340i XDrive Join Date: Oct 2019 Location: Costa Mesa, CA iTrader: (0)	Note for anyone that stumbles on this thread like I did, coding doesn't always seem to be necessary for the ambient lighting effects to function correctly. I swapped the carbon dash piece from a 22' M4 in to my 20' M340 and it worked with no coding required. I was on the latest software update at this time.
	Appreciate 0 Quote