[Limegrntaln]

Originally Posted by yocubed

That trim piece has 3 or 4 push pins on the inside edge. Look in the trunk and face the rear of the car and you'll see them. After that it's just held on by friction clips. Pull straight up and it'll come loose.

Ok, I did already pull the 4 push pins. But, I tried to pull it up and man, it’s on there. My fingers hurt like hell from doing the fender liners and screens.

And I had it like that. I pulled the socket and extension out and the socket tapped the opening of the carpet, I had my hand through, and it popped off and fell under. I’ll get it tomorrow.

[Limegrntaln]

Nice! It was more of a pain than I wanted it to be.

https://youtu.be/FiAPwuSRNgA?si=GvCUOsKRsWIaNSU-

[yocubed]

Looks good. Now let's see if Jerry can work some magic soon

[Burrcold]

Originally Posted by Limegrntaln

Nice! It was more of a pain than I wanted it to be.

https://youtu.be/FiAPwuSRNgA?si=GvCUOsKRsWIaNSU-

Looks good though!!

[yocubed]

Meanwhile mine are finally stateside

[Limegrntaln]

A little photo shoot.

[SwankPeRFection]

Lights look good. Dunno about the 21s in the rear though… but that’s just me. Not a fan of rubber band tires. 🤷*♂️ But the lights look nice, especially with the anniversary badges. 👍

[Limegrntaln]

Originally Posted by SwankPeRFection

Lights look good. Dunno about the 21s in the rear though… but that’s just me. Not a fan of rubber band tires. 🤷*♂️ But the lights look nice, especially with the anniversary badges. 👍

The wheel set is the Accessory wheels designed for the G80, so, you’ll see them on a lot of cars. But, you’re right, it can be a little rubber bandy looking. But they look great in person.

Originally Posted by M4Tejas

Do we still have strobe effects. You had it powered up before ignition.

Good job on buff out....

I only have it when you walk up to the car after it’s already been unlocked. When I come out of the house and walk up to the car, and the headlights come on, the tails just come on. Then when I start the car, they just blink on. When I turn the car off, it’s almost like a goodbye flicker to me. But it does it a little.

[HolyChitMeng]

FYI : Coding fixed it for me.
No wiring needed. I would contact @ codemyeuro he had it all figured out.

[Limegrntaln]

Yes!

[Limegrntaln]

Originally Posted by HolyChitMeng

FYI : Coding fixed it for me.
No wiring needed. I would contact @ codemyeuro he had it all figured out.

Got a video? And does it need to be recoded after update?

[HolyChitMeng]

Originally Posted by Limegrntaln

Got a video? And does it need to be recoded after update?

No video yet and yeah, but i've had my updates off for a while since my car is coded with all of the csl stuff.

[Limegrntaln]

Originally Posted by HolyChitMeng

No video yet and yeah, but i've had my updates off for a while since my car is coded with all of the csl stuff.

Yeah, I’m not sure I wanna mess with all that.

[thatguyM4]

i started to mess with the values and found it in Bimmer utility whic i use to code out the front side marker lamps - I manage to stumble on causing my own lights to flicker with the lock and unlock and reversed it back . So this is were I found that you have to turn off the tail light monitor and change the value of the taillight just like the old F series for LED Tail lights - Laser has to light up with no voltage loss - So looks like 2021-2024 you'll need coding its so hard to find anything on this subject and the people that do know wont tell you how to correct the problem - I may just order a real set and reset all my values to oem and duplicate the issue then all you guys can pay me a 100.00 dollars to code your car.....Just kiding guys .......I cant do it on my own replica laser CSL lights cause they dont flicker with the Lock and unlock so I'll order a set and get the coding process - and see what the mystery is all about - I love these lights they look so good Day or Night

[thatguyM4]

Originally Posted by HolyChitMeng

FYI : Coding fixed it for me.
No wiring needed. I would contact @ codemyeuro he had it all figured out.

The wiring is only to separate the turn and Brake light to operate individually

[yocubed]

Originally Posted by thatguyM4

i started to mess with the values and found it in Bimmer utility whic i use to code out the front side marker lamps - I manage to stumble on causing my own lights to flicker with the lock and unlock and reversed it back . So this is were I found that you have to turn off the tail light monitor and change the value of the taillight just like the old F series for LED Tail lights - Laser has to light up with no voltage loss - So looks like 2021-2024 you'll need coding its so hard to find anything on this subject and the people that do know wont tell you how to correct the problem - I may just order a real set and reset all my values to oem and duplicate the issue then all you guys can pay me a 100.00 dollars to code your car.....Just kiding guys .......I cant do it on my own replica laser CSL lights cause they dont flicker with the Lock and unlock so I'll order a set and get the coding process - and see what the mystery is all about - I love these lights they look so good Day or Night

What area of the BDC is it located in? As soon as my lights get in I'll tinker around.

ETA I'm thinking it will be FRA_H_L_IS_LED and FRA_H_R_IS_LED for the turn signals and BL_L_IS_LED and BL_R_IS_LED for the brake. So setting those from is LED to off should potentially fix it.

Stay tuned guys we'll get it.

[thatguyM4]

I'll dig into it and let you know were I found it in Bimmer Utility- I actually used my laptop it seems it had more things then the cell phone

[M4Tejas]

Originally Posted by Limegrntaln

Yes!

Dravitz gets dark in the shade. Amazing!


I need to read up on how to use the iPhone ProMax boomer getting too old

[yocubed]

More digging and we may also need to enable LIC feature 13 (It's information in Bimmerutility mentions OLED rear light installed). Just thinking out loud. Will know much more shortly once my lights get in. Hopefully very soon!

[Limegrntaln]

Originally Posted by M4Tejas

Dravitz gets dark in the shade. Amazing!


I need to read up on how to use the iPhone ProMax boomer getting too old

Looks way different in the garage with ambient lighting.

[thatguyM4]

Originally Posted by yocubed

More digging and we may also need to enable LIC feature 13 (It's information in Bimmerutility mentions OLED rear light installed). Just thinking out loud. Will know much more shortly once my lights get in. Hopefully very soon!

why do i know Lic 13 - Hmmmmm

[M4nication]

Just ordered my set. Now I wait...