[youthsonic]

Originally Posted by Thgpdt

Hi,

I tried to code the "Auto Steering Wheel heat" with actual Android Bimmercode but I don't get it IDrive menu (european G21 M340i)

Regards
Thgpdt

As far as I know, and as has already been explained in this thread, this feature is only available with the latest iOS beta. It may be available on Android at some point, but not right now.

[VipinLJ]

Originally Posted by youthsonic

As far as I know, and as has already been explained in this thread, this feature is only available with the latest iOS beta. It may be available on Android at some point, but not right now.

MGU expert coding is available on android bimmercode beta as of today

[Donia330i]

Originally Posted by VipinLJ

I coded in sport plus and comfort plus on the idrive. That was what I wanted the most

I tried searching for the auto steering heat thing but I couldn't find it under MGU and BDC. It was probably under one of the subheadings but I didn't have time to search all of it. So left it as is for now. Will search again later when I get time

What's the heading to add comfort plus to iDrive?

[VipinLJ]

Originally Posted by Donia330i

What's the heading to add comfort plus to iDrive?

Make the change below for comfort plus on iDrive

[VipinLJ]

Originally Posted by JSaid

Auto Steering Wheel heat:
(MGU-Headunit expert mode) :
AKT_Auto_Lenkrad...: nicht_aktiv -> aktiv

(BDC expert mode) :
LHZ_CCM_IKF: nicht_aktiv -> aktiv
IKF_ENABLE: ikf_alle_size

I found AKT_Auto and IKF_ENABLE. I couldn’t find LHZ_CCM under any of the sub modules. I activated the two I found. It brought up the option on the iDrive but I couldn’t select the option or set the temperature probably because I couldn’t activate LHZ. I probably missed it but I don’t mind as of now since it’ll be spring and then summer and I won’t need heated steering

[hamzag20]

Originally Posted by IndotagSwizz

Just got the Beta version last night and coded all of this today, worked perfect also coded M logo at the top of instrument cluster, now trying to find how to get more colors or at least red as an option for ambient lighting

How'd u code the M logo at the top of the instrument cluster?

[elektroselo]

Originally Posted by VipinLJ

I found AKT_Auto and IKF_ENABLE. I couldn’t find LHZ_CCM under any of the sub modules. I activated the two I found. It brought up the option on the iDrive but I couldn’t select the option or set the temperature probably because I couldn’t activate LHZ. I probably missed it but I don’t mind as of now since it’ll be spring and then summer and I won’t need heated steering

3142 PfLinLRE/LHZ CCM

[Alex2020g20]

Originally Posted by hamzag20

How'd u code the M logo at the top of the instrument cluster?

I'm wondering the same!

[VipinLJ]

Originally Posted by elektroselo

3142 PfLinLRE/LHZ CCM

I’ll check that out tomorrow. Thank you very much for the info!

[JSaid]

Originally Posted by elektroselo

3142 PfLinLRE/LHZ CCM

Yeah I found it under BDC Expert mode, it should be there. I can confirm that once enabling, auto steering wheel heat will function as expected.

I'll post a screenshot of mine as soon as I get a chance

Update: Can confirm that LHZ is in BDC, maybe it isnt on android?

[VipinLJ]

Originally Posted by JSaid

Yeah I found it under BDC Expert mode, it should be there. I can confirm that once enabling, auto steering wheel heat will function as expected.

I'll post a screenshot of mine as soon as I get a chance

Update: Can confirm that LHZ is in BDC, maybe it isnt on android?

Like elektroselo mentioned, I think I remember seeing a 3142 module. I must have missed it since I was checking all sub modules under BDC and MGU just in case and I grew impatient since Bluetooth is slow too
The problem is that in android, you can’t search from the main expert coding page. You have to open each sub module and then search there. There were like a hundred sub modules under the two modules and it got the better of me.
I’ll check it out again tomorrow and update my findings on here

[Ghozthunter]

Originally Posted by hamzag20

How'd u code the M logo at the top of the instrument cluster?

Plus 3 on that question. I would like to know how to add it.

[JSaid]

Originally Posted by Ghozthunter

Plus 3 on that question. I would like to know how to add it.

Make that plus 4

[VipinLJ]

Originally Posted by hamzag20

How'd u code the M logo at the top of the instrument cluster?

Originally Posted by Alex2020g20

I'm wondering the same!

Originally Posted by Ghozthunter

Plus 3 on that question. I would like to know how to add it.

Originally Posted by JSaid

Make that plus 4

Go to instrument cluster (DKOMBI4) expert coding mode. Then search for LOGO_SCHRIFTZUG. I think it was under sub module 3000 or 3001. I forget. Once you’re in LOGO_SCHRIFTZUG, you can see options for various models. Alpina, e, I, various M variants. Choose the one you want from the list

PS - That’s how I did it when I removed the logo from the top when I coded in the alpina cluster. I’m assuming it should be the same to code in a logo.

[JSaid]

Originally Posted by VipinLJ

Go to instrument cluster (DKOMBI4) expert coding mode. Then search for LOGO_SCHRIFTZUG. I think it was under sub module 3000 or 3001. I forget. Once you’re in LOGO_SCHRIFTZUG, you can see options for various models. Alpina, e, I, various M variants. Choose the one you want from the list

PS - That’s how I did it when I removed the logo from the top when I coded in the alpina cluster. I’m assuming it should be the same to code in a logo.

Is there anything else we need to enable as well? I found that option earlier today and tried setting to M. Unfortunately the logo didn't appear

[VipinLJ]

Originally Posted by JSaid

Is there anything else we need to enable as well? I found that option earlier today and tried setting to M. Unfortunately the logo didn't appear

Damn. I was hoping that would work. When I coded the alpina layout, I changed the global layout variant option too. But since you guys don’t want that (and want the stock layout), I didn’t mention that. I’ll take a look tomorrow and see if I can code in the M logo. I’ll report back once I’ve found something new.

[JSaid]

Originally Posted by VipinLJ

Damn. I was hoping that would work. When I coded the alpina layout, I changed the global layout variant option too. But since you guys don’t want that (and want the stock layout), I didn’t mention that. I’ll take a look tomorrow and see if I can code in the M logo. I’ll report back once I’ve found something new.

Sounds good I'll play around with it more as well

[mmo011]

Originally Posted by JSaid

Is there anything else we need to enable as well? I found that option earlier today and tried setting to M. Unfortunately the logo didn't appear

Hi all, no logo also to me, I've tried different types but on Standard Layout LOGO not appear... I've 11/2019.34 version on my G20, all the others coding works perfectly at the first time including SPORT+ and COMFORT+ that's my latest addition made with the TestFlight beta app.
I've not tryed to change layout to M or Alpine due to different scale issue... :-(

[xRingo94]

Anyone knows how to scale the M instrument to the „normal" scale?

i would like to have M but not with the scale, or is it possible to code the normal Sport cluster to every mode like adaptiv?

[VipinLJ]

Originally Posted by mmo011

Hi all, no logo also to me, I've tried different types but on Standard Layout LOGO not appear... I've 11/2019.34 version on my G20, all the others coding works perfectly at the first time including SPORT+ and COMFORT+ that's my latest addition made with the TestFlight beta app.
I've not tryed to change layout to M or Alpine due to different scale issue... :-(

Originally Posted by JSaid

Sounds good I'll play around with it more as well

Yup. I tried what I said and couldn’t set the logo on the normal cluster either. And I searched but couldn’t find anything else I could change. Plus it being in German doesn’t help at all.

Originally Posted by xRingo94

Anyone knows how to scale the M instrument to the „normal" scale?

i would like to have M but not with the scale, or is it possible to code the normal Sport cluster to every mode like adaptiv?

By scale, you mean the speed difference? No idea how to change it. But mine was off too. BMW has a normal difference (shows 2MPH higher than GPS speeds) but my M cluster showed almost 4MPH higher. I coded it back to the stock cluster.
To remove the speed correction, follow what JSaid has mentioned below.

Originally Posted by JSaid

I was able to update the speedo to display true speed for anyone interested:
Go to instrument cluster expert mode,

BC_V_KORREKTUR: from 'mit_korrecktur' to 'ohne_korrecktur'

You can thank me later 😁

[VipinLJ]

Originally Posted by elektroselo

3142 PfLinLRE/LHZ CCM

That worked. I was able to code it all in today and make auto steering heat work. Thank you very much!

[mrjonesg20]

I successfully coded sport plus on my car, while browsing in the FES menu I saw two more options with the names; 1.SPORT_CONF_STEERING_SPORTPLUS
2. SPORT_CONF_ATTENUATION_SPORTPLUS
Does anyone know what those two options are for?