[Jnasratyar]

I’m in the market for a new set of wheels, but can’t really find much I like. I have seen people put 666m and 794m wheels on m340s and I really like how it looks, but I don’t get how they made it fit. I’m no expert in wheel specs, but from what I’ve researched, my car has a 5x112 lug pattern while those wheels have a 5x120. Is there still a way around this or no?

[Chubbiejones]

Originally Posted by Jnasratyar

I’m in the market for a new set of wheels, but can’t really find much I like. I have seen people put 666m and 794m wheels on m340s and I really like how it looks, but I don’t get how they made it fit. I’m no expert in wheel specs, but from what I’ve researched, my car has a 5x112 lug pattern while those wheels have a 5x120. Is there still a way around this or no?

From what I’ve seen and read, there are a few manufacturers who have identical wheel designs with the correct bolt pattern. Personally, I’d go a different direction but hey, different strokes for different folks.

[Jnasratyar]

Originally Posted by Chubbiejones

From what I’ve seen and read, there are a few manufacturers who have identical wheel designs with the correct bolt pattern. Personally, I’d go a different direction but hey, different strokes for different folks.

Yeah I’ve been seeing some of those reps for very cheap on eBay, but I just wouldn’t feel right putting reps on this car. Everything else cost a damn arm n a leg and of course there are cheaper wheels, but I just for some reason feel weird going outside of big name brands like hre, bbs, apex, etc.

[Chubbiejones]

Originally Posted by Jnasratyar

Yeah I’ve been seeing some of those reps for very cheap on eBay, but I just wouldn’t feel right putting reps on this car. Everything else cost a damn arm n a leg and of course there are cheaper wheels, but I just for some reason feel weird going outside of big name brands like hre, bbs, apex, etc.

I feel the same, which is why I have Vossen wheels on my car. The next go round I’ll be purchasing a set of BC Forged wheels. There are a ton of choices these days, all depends on your needs and budget.

[Jnasratyar]

Originally Posted by Chubbiejones

I feel the same, which is why I have Vossen wheels on my car. The next go round I’ll be purchasing a set of BC Forged wheels. There are a ton of choices these days, all depends on your needs and budget.

Yeah, tru just gotta take my time and make the right choice.

[Chubbiejones]

Originally Posted by Jnasratyar

Yeah, tru just gotta take my time and make the right choice.

Fully agree

[Jnasratyar]

Originally Posted by Ajhanif

I got some 20inch black wheels for sale for g20. 20x8.5 245/35/20 front and 20x9.5 275/30/20 rear pzero summers on all.

Thank you, but I actually already got a set of wheels.

[Asleep-Albatross]

Originally Posted by Chubbiejones

I feel the same, which is why I have Vossen wheels on my car. The next go round I’ll be purchasing a set of BC Forged wheels. There are a ton of choices these days, all depends on your needs and budget.

Can I ask which Vossen wheels you went with (and the sizes x width)?

I have an incoming M440i, my dealer's only option to upgrade from the stock 19" is the 795M in 20" - which has staggered, Fronts 20" x 8" and Rears 20" x 8.5".

I *love* the Vossen HF-2, and their minimum sizes on 20 inches would be Fronts 20" x 8.5" and Rears 20" x 9" to get a staggered setup. Theoretically, from everything I can tell, they should be fine, but looking for some real world validation.

[Chubbiejones]

Originally Posted by Asleep-Albatross

Can I ask which Vossen wheels you went with (and the sizes x width)?

I have an incoming M440i, my dealer's only option to upgrade from the stock 19" is the 795M in 20" - which has staggered, Fronts 20" x 8" and Rears 20" x 8.5".

I *love* the Vossen HF-2, and their minimum sizes on 20 inches would be Fronts 20" x 8.5" and Rears 20" x 9" to get a staggered setup. Theoretically, from everything I can tell, they should be fine, but looking for some real world validation.

My below post has all the information you require:

https://www.bimmerpost.com/forums/sh...php?p=29088726

[M430ICpe]

i am looking at putting on some new rims/tires on my new 2022 M430I model too and havent found much luck on options for black rims,

BremmerKraft Br18- Front & Rear 20 x 8.5 seem to fit

Rohana RFX11 - Front 19x8.5 & Rear 20x 8.5 and i have seen someone do a set up F- 20x9 R 20x10

I might do springs Eibach vs H & R .. as i would prefer more of a less stiff ride and also no run flat tires... due to comfort for me.

[Jnasratyar]

Originally Posted by M430ICpe

i am looking at putting on some new rims/tires on my new 2022 M430I model too and havent found much luck on options for black rims,

BremmerKraft Br18- Front & Rear 20 x 8.5 seem to fit

Rohana RFX11 - Front 19x8.5 & Rear 20x 8.5 and i have seen someone do a set up F- 20x9 R 20x10

I might do springs Eibach vs H & R .. as i would prefer more of a less stiff ride and also no run flat tires... due to comfort for me.

20inch on these cars for me doesn’t look right, but to each their own, but yeah you’ll come to find there isn’t a lot of wheels that fit this chassis that come from bigger brands. What helped me was throwing away the mindset of needed on brand wheels. I ended up just copping a pair of vmr v804s and I am in love with my car now. 19x9.5 et 35 rear and 19x8.5 et 35 front. As for the springs, I don’t know literally anything about Eibach, but h&r I’ve heard rides like shit, so if comfort is a must for you, definitely go for something with a more conservative drop that focuses more on ride quality, like Dinan. I have my ‘23 m340i on Dinan springs and bump stops and I couldn’t even tell the difference in ride. I will admit the drop is a bit underwhelming though.