[CaleCro]

Hi guys

Need help with choosing correct fitment for this beuty Oxidegrey M340iX

How to choose correct width and offset for x-drive, staggered?





I want to fit these ones

[CaleCro]

Well since there is still no any help from this forum, google the KING help me to figure out aprox. fitment for G20 X-drive compatible fitment.

Useful sites
willtheyfit
fitmentindustries
APEX

Here is what i found & figured out, so can be useful for somebody

19'' Wheel & Tyre combination

STOCK 19''
-------------------------
225/40/19 8Jx19 ET27
255/35/19 8.5Jx19 ET40

ALPINA B3 19''
-----------------------
255/35/19 8.5Jx19 ET28
265/35/19 9.5Jx19 ET38

SUPRA A90
------------------------
255/35/19 9Jx19 ET32 +7mm spacer
275/35/19 10Jx19 ET40

20'' Wheel & Tyre combination
STOCK 20''
-------------------------
225/35/20 8Jx20 ET 27
255/30/20 8.5Jx20 ET 40

ALPINA B3 20''
-------------------------
255/30/20 8.5Jx20 ET28
265/30/20 9.5Jx20 ET38

Next is measurement for wheels to be flushed with fender,Xdrive compatibele STOCK M/H&R/Eibach lowering springs + S2VF Adaptive M chassis + S2NH M sport brakes:

FRONT WHEEL SETUPS FLUSHED WITH FENDER

8J ET27 Poke 74.6mm inset 128.6mm Backspacing (in)= 5.56'' *STOCK FRONT WHEELs NOT Flushed with fender M340iX
8.5J ET22 Poke 86mm inset 148mm Backspacing (in)= 5.62''
9J ET25 Poke 89.3mm inset 139.3mm Backspacing (in)= 5.98''

REAR WHEEL SETUPS FLUSHED WITH FENDER
---------------------------------------
8.5j ET40 Poke 86mm inset 30mm Backspacing (in)= 6.32'' *STOCK REAR WHEELs NOT Flushed with fender M340iX
8.5j ET20 Poke 88mm inset 128mm Backspacing (in)= 5.54''
9J ET25 Poke 89.3mm inset 139.3mm Backspacing (in)= 5.98''
9.5J ET32 Poke 88.7mm inset 152.7mm Backspacing (in)= 6.51''
10J ET38 Poke 89mm inset 165mm Backspacing (in)= 7''
10.5J ET45 Poke 88.7mm inset 178.4mm Backspacing (in)= 7,52''



So based on above data from links and google i think i will go with next fitment:

20x8.5J ET22 / 20x9.5J ET32
OR
20x9J ET25 / 20x10J ET38

Only thing what i still doesnt know how concave to choose them....

[CaleCro]

Originally Posted by CaleCro

Only thing what i still doesn't know how concave to choose them....

I got final answer from WORK, for my setup, Adaptive drive + M sport brakes 18''... for concave wheels at front i need to choose R Disk (Big Caliper / Flat Spoke) and for rears A Disk (Standard / Mid Concave)

That is it... now lets order them

[tibi.dstrct]

Hello,

Did you ordered them yet? I’m so curious how they look, I’m thinking to get a set for my G21 too

Thanks!

[CaleCro]

Originally Posted by tibi.dstrct

Hello,

Did you ordered them yet? I’m so curious how they look, I’m thinking to get a set for my G21 too

Thanks!

No at the end i got Mperformance 795M Bicolor ferric grey