BEST G20 Coding Options found here

gnolivos · 02-04-2023, 02:32 PM

Just wanted to share my "curated" list of applied and verified/tested Coding options for my G20. I have had these running on my M340i for 14 months without issues.

STANDARD CODING:
================
-5 blinks turn signal. Standard coding

-Window lifter interruption when door opens, set to OFF. Standard Coding.

-Hazard Braking, set to Active. Standard Coding.

-Auto mirror tilt angle, from 70 to 50 deg. Standard Coding.

-Initial Seatbelt reminder, set to OFF. Standard Coding.

-Seat Heating Cooling setting memory set from 15 mins to 24 hrs. Standard Coding.

-Refresh Rate Digital Speed from 2fps to 5 fps. Standard Coding.

-Brake Force Display Activation speed from 5km/h to 40km/h. Standard Coding.

-Set ADAPTIVE as default driving mode. Standard Coding.

EXPERT MODE CODING:
===================
-Brakeforce blink tail lights. GEFAHRENBREMSLICHT_TYP from NICHT_AKTIV to BREMSLICHT_BLINKEND

-Disable legal disclaimer camera MACRO_CAM_LEGALDISCLAIMER from ID_MIT_TIMEOUT to KEIN_ID

-Close Moonroof when it rains:
HU ECU:
HU_MGU_REGEN_SCHKIESSEN from inaktiv to AKTIV
then in Moonroof ECU:
REGENAKTIV from inaktiv to AKTIV
REGENAKTIV_ROBUST from inaktiv to AKTIV
STATUSRCTIME to DEFAULTWERT
REGENPOSITION to GESCHLOSSEN

-Enable Exhaust Flap position configuration (open up Engine Sound in options menu in idrive)
in HU ECU:
Display_Configurability_Engine_sound from inaktiv to AKTIV
Display_Menu_Configuration_Sound from inaktiv to AKTIV

-Enable B&W audio (in HU ECU):
AUDIO_SYSTEM from alev3_ram to ALEV4_RAM

-Enable Cornering lights ALSO if high beams are on (FEM module?)
C_CLC_HIGHBEAM_DIS from disable (0x01) to ENABLE (0x00) 'note, I think these tags are backwards to avoid confusion in the interface? 0x00 is usually enable

-Disabled legal Disclaimers at startup. Prefer to do this in expert mode. In HU ECU:
LEGAL_DISCLAIMER_TIME from Ld_mit_timeout to KEIN_LD

-Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even.
This has to be changed in HU and also in BDC. 4 changes total
VOFFSET from nicht_aktiv to GEN_2 (0x02)
VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02)

-Tweaked again cornering lights to trigger upon turn signal at even higher speeds
C_CLC_BLINK_V0 from0x30 to 0x40 (40 hex is 64 kmh dec, equals 40mph)
C_CLC_BLINK_V1 from0x38 to 0x48 (48 hex is 72 kmh dec, equals 45mph)

-Enabled tow hitch camera view in HU
MACRO_TAILER_COUPLING from inaktiv to AKTIV

-Fix for dimming with tinted windows:
Headunit - 3005 APIX_CID_UND_ZIN - DIM_CURVE_X2 – change values to 0x00, 0x00 (from 0x1F, 0xC0)
Instrument cluster - 3000 Anzeige_Konfiguration – DIM_TAG_NACHT_LICHT_EIN_ENABLE – change value to aktiv
Instrument cluster - 3005 FuBi_Parameter – DIM_DTN – change value to 0x5F (from 0x3F) seems better compromise for SOME dimming during dusk than 0x7F that forums said

mondayze · 02-06-2023, 03:06 PM

does anyone know if its possible to code sport as default mode BUT keep the standard HUD view? I hate the sport HUD...

gnolivos · 02-06-2023, 03:12 PM

Wrong thread honestly.

gnolivos · 02-06-2023, 03:13 PM

Also, you can keep standard Hud in sports mode without coding. Check your settings in the iDrive

Slepy87 · 02-19-2023, 04:57 PM

What app/apps you were using?

TheNine90 · 02-20-2023, 02:32 AM

Quote:

Originally Posted by Slepy87

What app/apps you were using?

You can use esys(with launcher or bimmerutility) ,bimmercode ,protool
https://g20.bimmerpost.com/forums/sh....php?t=1673049

Frank_Zuccarini · 02-20-2023, 02:07 PM

Quote:

Originally Posted by gnolivos

Just wanted to share my "curated" list of applied and verified/tested Coding options for my G20. I have had these running on my M340i for 14 months without issues.

STANDARD CODING:
================
-5 blinks turn signal. Standard coding

-Window lifter interruption when door opens, set to OFF. Standard Coding.

-Hazard Braking, set to Active. Standard Coding.

-Auto mirror tilt angle, from 70 to 50 deg. Standard Coding.

-Initial Seatbelt reminder, set to OFF. Standard Coding.

-Seat Heating Cooling setting memory set from 15 mins to 24 hrs. Standard Coding.

-Refresh Rate Digital Speed from 2fps to 5 fps. Standard Coding.

-Brake Force Display Activation speed from 5km/h to 40km/h. Standard Coding.

-Set ADAPTIVE as default driving mode. Standard Coding.

EXPERT MODE CODING:
===================
-Brakeforce blink tail lights. GEFAHRENBREMSLICHT_TYP from NICHT_AKTIV to BREMSLICHT_BLINKEND

-Disable legal disclaimer camera MACRO_CAM_LEGALDISCLAIMER from ID_MIT_TIMEOUT to KEIN_ID

-Close Moonroof when it rains:
HU ECU:
HU_MGU_REGEN_SCHKIESSEN from inaktiv to AKTIV
then in Moonroof ECU:
REGENAKTIV from inaktiv to AKTIV
REGENAKTIV_ROBUST from inaktiv to AKTIV
STATUSRCTIME to DEFAULTWERT
REGENPOSITION to GESCHLOSSEN

-Enable Exhaust Flap position configuration (open up Engine Sound in options menu in idrive)
in HU ECU:
Display_Configurability_Engine_sound from inaktiv to AKTIV
Display_Menu_Configuration_Sound from inaktiv to AKTIV

-Enable B&W audio (in HU ECU):
AUDIO_SYSTEM from alev3_ram to ALEV4_RAM

-Enable Cornering lights ALSO if high beams are on (FEM module?)
C_CLC_HIGHBEAM_DIS from disable (0x01) to ENABLE (0x00) 'note, I think these tags are backwards to avoid confusion in the interface? 0x00 is usually enable

-Disabled legal Disclaimers at startup. Prefer to do this in expert mode. In HU ECU:
LEGAL_DISCLAIMER_TIME from Ld_mit_timeout to KEIN_LD

-Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even.
This has to be changed in HU and also in BDC. 4 changes total
VOFFSET from nicht_aktiv to GEN_2 (0x02)
VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02)

-Tweaked again cornering lights to trigger upon turn signal at even higher speeds
C_CLC_BLINK_V0 from0x30 to 0x40 (40 hex is 64 kmh dec, equals 40mph)
C_CLC_BLINK_V1 from0x38 to 0x48 (48 hex is 72 kmh dec, equals 45mph)

-Enabled tow hitch camera view in HU
MACRO_TAILER_COUPLING from inaktiv to AKTIV

-Fix for dimming with tinted windows:
Headunit - 3005 APIX_CID_UND_ZIN - DIM_CURVE_X2 – change values to 0x00, 0x00 (from 0x1F, 0xC0)
Instrument cluster - 3000 Anzeige_Konfiguration – DIM_TAG_NACHT_LICHT_EIN_ENABLE – change value to aktiv
Instrument cluster - 3005 FuBi_Parameter – DIM_DTN – change value to 0x5F (from 0x3F) seems better compromise for SOME dimming during dusk than 0x7F that forums said

Nice set of coding options, very nicely explained.

Thanks...................... Frank

g20rafo · 09-08-2023, 11:38 PM

Quote:

Originally Posted by gnolivos

Just wanted to share my "curated" list of applied and verified/tested Coding options for my G20. I have had these running on my M340i for 14 months without issues.

STANDARD CODING:
================
-5 blinks turn signal. Standard coding

-Window lifter interruption when door opens, set to OFF. Standard Coding.

-Hazard Braking, set to Active. Standard Coding.

-Auto mirror tilt angle, from 70 to 50 deg. Standard Coding.

-Initial Seatbelt reminder, set to OFF. Standard Coding.

-Seat Heating Cooling setting memory set from 15 mins to 24 hrs. Standard Coding.

-Refresh Rate Digital Speed from 2fps to 5 fps. Standard Coding.

-Brake Force Display Activation speed from 5km/h to 40km/h. Standard Coding.

-Set ADAPTIVE as default driving mode. Standard Coding.

EXPERT MODE CODING:
===================
-Brakeforce blink tail lights. GEFAHRENBREMSLICHT_TYP from NICHT_AKTIV to BREMSLICHT_BLINKEND

-Disable legal disclaimer camera MACRO_CAM_LEGALDISCLAIMER from ID_MIT_TIMEOUT to KEIN_ID

-Close Moonroof when it rains:
HU ECU:
HU_MGU_REGEN_SCHKIESSEN from inaktiv to AKTIV
then in Moonroof ECU:
REGENAKTIV from inaktiv to AKTIV
REGENAKTIV_ROBUST from inaktiv to AKTIV
STATUSRCTIME to DEFAULTWERT
REGENPOSITION to GESCHLOSSEN

-Enable Exhaust Flap position configuration (open up Engine Sound in options menu in idrive)
in HU ECU:
Display_Configurability_Engine_sound from inaktiv to AKTIV
Display_Menu_Configuration_Sound from inaktiv to AKTIV

-Enable B&W audio (in HU ECU):
AUDIO_SYSTEM from alev3_ram to ALEV4_RAM

-Enable Cornering lights ALSO if high beams are on (FEM module?)
C_CLC_HIGHBEAM_DIS from disable (0x01) to ENABLE (0x00) 'note, I think these tags are backwards to avoid confusion in the interface? 0x00 is usually enable

-Disabled legal Disclaimers at startup. Prefer to do this in expert mode. In HU ECU:
LEGAL_DISCLAIMER_TIME from Ld_mit_timeout to KEIN_LD

-Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even.
This has to be changed in HU and also in BDC. 4 changes total
VOFFSET from nicht_aktiv to GEN_2 (0x02)
VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02)

-Tweaked again cornering lights to trigger upon turn signal at even higher speeds
C_CLC_BLINK_V0 from0x30 to 0x40 (40 hex is 64 kmh dec, equals 40mph)
C_CLC_BLINK_V1 from0x38 to 0x48 (48 hex is 72 kmh dec, equals 45mph)

-Enabled tow hitch camera view in HU
MACRO_TAILER_COUPLING from inaktiv to AKTIV

-Fix for dimming with tinted windows:
Headunit - 3005 APIX_CID_UND_ZIN - DIM_CURVE_X2 – change values to 0x00, 0x00 (from 0x1F, 0xC0)
Instrument cluster - 3000 Anzeige_Konfiguration – DIM_TAG_NACHT_LICHT_EIN_ENABLE – change value to aktiv
Instrument cluster - 3005 FuBi_Parameter – DIM_DTN – change value to 0x5F (from 0x3F) seems better compromise for SOME dimming during dusk than 0x7F that forums said

So will the last one fix how my digital dash and idrive gets super dark sometimes where i cant even read it? 15% tints btw

gnolivos · 09-09-2023, 06:04 AM

Yes it will fix the dark cluster issue

rjbaron0817 · 01-11-2024, 09:23 PM

I just picked up a 2020 X3. The blinker sounds like it’s on steroids. Do you know if there is anywhere to change the volume? I found “Blinker_Volume” in one of the advanced/expert options. But oddly enough, that wasn’t it.

I apologize if this is not the right thread for this question. To be honest, rarely ever use forums.

Any/all help to eliminate the loud late 1970s blinker volume is appreciated Cheers.

Quote:

Originally Posted by gnolivos

Just wanted to share my "curated" list of applied and verified/tested Coding options for my G20. I have had these running on my M340i for 14 months without issues.

STANDARD CODING:
================
-5 blinks turn signal. Standard coding

-Window lifter interruption when door opens, set to OFF. Standard Coding.

-Hazard Braking, set to Active. Standard Coding.

-Auto mirror tilt angle, from 70 to 50 deg. Standard Coding.

-Initial Seatbelt reminder, set to OFF. Standard Coding.

-Seat Heating Cooling setting memory set from 15 mins to 24 hrs. Standard Coding.

-Refresh Rate Digital Speed from 2fps to 5 fps. Standard Coding.

-Brake Force Display Activation speed from 5km/h to 40km/h. Standard Coding.

-Set ADAPTIVE as default driving mode. Standard Coding.

EXPERT MODE CODING:
===================
-Brakeforce blink tail lights. GEFAHRENBREMSLICHT_TYP from NICHT_AKTIV to BREMSLICHT_BLINKEND

-Disable legal disclaimer camera MACRO_CAM_LEGALDISCLAIMER from ID_MIT_TIMEOUT to KEIN_ID

-Close Moonroof when it rains:
HU ECU:
HU_MGU_REGEN_SCHKIESSEN from inaktiv to AKTIV
then in Moonroof ECU:
REGENAKTIV from inaktiv to AKTIV
REGENAKTIV_ROBUST from inaktiv to AKTIV
STATUSRCTIME to DEFAULTWERT
REGENPOSITION to GESCHLOSSEN

-Enable Exhaust Flap position configuration (open up Engine Sound in options menu in idrive)
in HU ECU:
Display_Configurability_Engine_sound from inaktiv to AKTIV
Display_Menu_Configuration_Sound from inaktiv to AKTIV

-Enable B&W audio (in HU ECU):
AUDIO_SYSTEM from alev3_ram to ALEV4_RAM

-Enable Cornering lights ALSO if high beams are on (FEM module?)
C_CLC_HIGHBEAM_DIS from disable (0x01) to ENABLE (0x00) 'note, I think these tags are backwards to avoid confusion in the interface? 0x00 is usually enable

-Disabled legal Disclaimers at startup. Prefer to do this in expert mode. In HU ECU:
LEGAL_DISCLAIMER_TIME from Ld_mit_timeout to KEIN_LD

-Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even.
This has to be changed in HU and also in BDC. 4 changes total
VOFFSET from nicht_aktiv to GEN_2 (0x02)
VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02)

-Tweaked again cornering lights to trigger upon turn signal at even higher speeds
C_CLC_BLINK_V0 from0x30 to 0x40 (40 hex is 64 kmh dec, equals 40mph)
C_CLC_BLINK_V1 from0x38 to 0x48 (48 hex is 72 kmh dec, equals 45mph)

-Enabled tow hitch camera view in HU
MACRO_TAILER_COUPLING from inaktiv to AKTIV

-Fix for dimming with tinted windows:
Headunit - 3005 APIX_CID_UND_ZIN - DIM_CURVE_X2 – change values to 0x00, 0x00 (from 0x1F, 0xC0)
Instrument cluster - 3000 Anzeige_Konfiguration – DIM_TAG_NACHT_LICHT_EIN_ENABLE – change value to aktiv
Instrument cluster - 3005 FuBi_Parameter – DIM_DTN – change value to 0x5F (from 0x3F) seems better compromise for SOME dimming during dusk than 0x7F that forums said

gnolivos · 05-17-2025, 01:16 AM

Bump for people who missed this.

RayCro328 · 05-21-2025, 01:21 PM

Hello, what do you get if you activate B&W sound option on Harman Kardon system? Thanks

gnolivos · 05-21-2025, 01:23 PM

[QUOTE=RayCro328;32095190]Hello, what do you get if you activate B&W sound option on Harman Kardon system? Thanks

Slightly better sound and many sound stage options and equalizer.

RayCro328 · 05-22-2025, 03:13 PM

[QUOTE=gnolivos;32095197]

Quote:

Originally Posted by RayCro328

Hello, what do you get if you activate B&W sound option on Harman Kardon system? Thanks

Slightly better sound and many sound stage options and equalizer.

Didnt tried to code B&W sound option. I dont use stage options, they are not good for any type of music. Equalizer is all I need, and I have it in Harman Kardon on idrive.
Its a pitty that HK sound has a lack of energy and power.

LT4Life · 09-02-2025, 01:39 PM

following!

Bronxg20 · 09-06-2025, 03:22 AM

Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even.
This has to be changed in HU and also in BDC. 4 changes total
VOFFSET from nicht_aktiv to GEN_2 (0x02)
VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02)

Do u mind explaining what is this for? Thanks I advance

gnolivos · 09-06-2025, 07:37 PM

Quote:

Originally Posted by Bronxg20

Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even.
This has to be changed in HU and also in BDC. 4 changes total
VOFFSET from nicht_aktiv to GEN_2 (0x02)
VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02)

Do u mind explaining what is this for? Thanks I advance

This configures the speed at which your hud will turn RED for speeding above speed limit. It also is the speed at which your cruise control will lock into when you hit the SET button on your wheel cruise control.

So if you are on a 55mph zone and you set a 5mph cushion, when you hit SET the cruise control will lock you in at 60mph. Also if you drive at 61 on this zone it will show red. If you are going 60 then not red.

dhock_holiday · 09-13-2025, 06:16 PM

Anyone tested the auto close moonroof on the G20 LCI? Doesn’t seem to work for me

MrMegambo · 09-14-2025, 04:06 PM

Quote:

Originally Posted by dhock_holiday

Anyone tested the auto close moonroof on the G20 LCI? Doesn’t seem to work for me

car needs to be running.

JaminJ · 03-10-2026, 12:37 PM

Quote:

Originally Posted by dhock_holiday

Anyone tested the auto close moonroof on the G20 LCI? Doesn’t seem to work for me

I just got this working on my 2023 G20 330e idrive8. Code as shown above. Once coded, start car, go into Door & Windows menu, scroll down to bottom to a toggle switch that says Close Sunroof When Raining, toggle it on, open sunroof, turn off and exit car, lock the doors, spray windshield near rain sensor with water.

Worked for me. Closed sunroof from both the tilted and completely open positions. I also conformed it will close after 6 hours.

dhock_holiday · 03-13-2026, 12:03 AM

Quote:

Originally Posted by JaminJ

I just got this working on my 2023 G20 330e idrive8. Code as shown above. Once coded, start car, go into Door & Windows menu, scroll down to bottom to a toggle switch that says Close Sunroof When Raining, toggle it on, open sunroof, turn off and exit car, lock the doors, spray windshield near rain sensor with water.

Worked for me. Closed sunroof from both the tilted and completely open positions. I also conformed it will close after 6 hours.

Thanks! I’ll give it a shot

dhock_holiday · 03-13-2026, 06:33 PM

Quote:

Originally Posted by JaminJ

I just got this working on my 2023 G20 330e idrive8. Code as shown above. Once coded, start car, go into Door & Windows menu, scroll down to bottom to a toggle switch that says Close Sunroof When Raining, toggle it on, open sunroof, turn off and exit car, lock the doors, spray windshield near rain sensor with water.

Worked for me. Closed sunroof from both the tilted and completely open positions. I also conformed it will close after 6 hours.

Update: Do I need ISTA? Doesnt seem to work with BimmerCode.

This option is missing from bimmercode:

HU_MGU_REGEN_SCHKIESSEN from inaktiv to AKTIV

Coding the moonroof ECU is possible but doenst seem to do anything.

02-04-2023, 02:32 PM	#1
gnolivos Captain 426 Rep 764 Posts Drives: Various BMW Join Date: Apr 2018 Location: US iTrader: (0)	BEST G20 Coding Options found here Just wanted to share my "curated" list of applied and verified/tested Coding options for my G20. I have had these running on my M340i for 14 months without issues. STANDARD CODING: ================ -5 blinks turn signal. Standard coding -Window lifter interruption when door opens, set to OFF. Standard Coding. -Hazard Braking, set to Active. Standard Coding. -Auto mirror tilt angle, from 70 to 50 deg. Standard Coding. -Initial Seatbelt reminder, set to OFF. Standard Coding. -Seat Heating Cooling setting memory set from 15 mins to 24 hrs. Standard Coding. -Refresh Rate Digital Speed from 2fps to 5 fps. Standard Coding. -Brake Force Display Activation speed from 5km/h to 40km/h. Standard Coding. -Set ADAPTIVE as default driving mode. Standard Coding. EXPERT MODE CODING: =================== -Brakeforce blink tail lights. GEFAHRENBREMSLICHT_TYP from NICHT_AKTIV to BREMSLICHT_BLINKEND -Disable legal disclaimer camera MACRO_CAM_LEGALDISCLAIMER from ID_MIT_TIMEOUT to KEIN_ID -Close Moonroof when it rains: HU ECU: HU_MGU_REGEN_SCHKIESSEN from inaktiv to AKTIV then in Moonroof ECU: REGENAKTIV from inaktiv to AKTIV REGENAKTIV_ROBUST from inaktiv to AKTIV STATUSRCTIME to DEFAULTWERT REGENPOSITION to GESCHLOSSEN -Enable Exhaust Flap position configuration (open up Engine Sound in options menu in idrive) in HU ECU: Display_Configurability_Engine_sound from inaktiv to AKTIV Display_Menu_Configuration_Sound from inaktiv to AKTIV -Enable B&W audio (in HU ECU): AUDIO_SYSTEM from alev3_ram to ALEV4_RAM -Enable Cornering lights ALSO if high beams are on (FEM module?) C_CLC_HIGHBEAM_DIS from disable (0x01) to ENABLE (0x00) 'note, I think these tags are backwards to avoid confusion in the interface? 0x00 is usually enable -Disabled legal Disclaimers at startup. Prefer to do this in expert mode. In HU ECU: LEGAL_DISCLAIMER_TIME from Ld_mit_timeout to KEIN_LD -Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even. This has to be changed in HU and also in BDC. 4 changes total VOFFSET from nicht_aktiv to GEN_2 (0x02) VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02) -Tweaked again cornering lights to trigger upon turn signal at even higher speeds C_CLC_BLINK_V0 from0x30 to 0x40 (40 hex is 64 kmh dec, equals 40mph) C_CLC_BLINK_V1 from0x38 to 0x48 (48 hex is 72 kmh dec, equals 45mph) -Enabled tow hitch camera view in HU MACRO_TAILER_COUPLING from inaktiv to AKTIV -Fix for dimming with tinted windows: Headunit - 3005 APIX_CID_UND_ZIN - DIM_CURVE_X2 – change values to 0x00, 0x00 (from 0x1F, 0xC0) Instrument cluster - 3000 Anzeige_Konfiguration – DIM_TAG_NACHT_LICHT_EIN_ENABLE – change value to aktiv Instrument cluster - 3005 FuBi_Parameter – DIM_DTN – change value to 0x5F (from 0x3F) seems better compromise for SOME dimming during dusk than 0x7F that forums said
	Appreciate 14 gaushell9.50 B58josue17.00 okankaymak163.00 BayM34077.00 jd85_m0.00 Frank_Zuccarini73.50 Eljefe25125.00 apwm340i69.50 Das_Stiggy46.50 ThunderNIGHTtx0.00 E__F26.50 jsh1392788.50 LT4Life4.50 Kool3628.00 Tweet Quote

02-06-2023, 03:06 PM	#2
mondayze Major 613 Rep 1,115 Posts Drives: G20 M340xi LCI Join Date: Jul 2022 Location: Santa Clara Valley, CA iTrader: (0)	does anyone know if its possible to code sport as default mode BUT keep the standard HUD view? I hate the sport HUD...
	Appreciate 0 Quote

02-06-2023, 03:12 PM	#3
gnolivos Captain 426 Rep 764 Posts Drives: Various BMW Join Date: Apr 2018 Location: US iTrader: (0)	Wrong thread honestly. __________________ Bimmercode best coding options (Basic and Advanced): https://g20.bimmerpost.com/forums/sh...5#post29807925
	Appreciate 0 Quote

02-06-2023, 03:13 PM	#4
gnolivos Captain 426 Rep 764 Posts Drives: Various BMW Join Date: Apr 2018 Location: US iTrader: (0)	Also, you can keep standard Hud in sports mode without coding. Check your settings in the iDrive __________________ Bimmercode best coding options (Basic and Advanced): https://g20.bimmerpost.com/forums/sh...5#post29807925
	Appreciate 0 Quote

02-19-2023, 04:57 PM	#5
Slepy87 New Member 2 Rep 16 Posts Drives: 2021 Bmw 330i G20 Join Date: Feb 2023 Location: London iTrader: (0) Garage List 2021 BMW 330i [0.00]	What app/apps you were using?
	Appreciate 0 Quote

09-09-2023, 06:04 AM	#9
gnolivos Captain 426 Rep 764 Posts Drives: Various BMW Join Date: Apr 2018 Location: US iTrader: (0)	Yes it will fix the dark cluster issue __________________ Bimmercode best coding options (Basic and Advanced): https://g20.bimmerpost.com/forums/sh...5#post29807925
	Appreciate 1 g20rafo1.50 Quote

05-17-2025, 01:16 AM	#11
gnolivos Captain 426 Rep 764 Posts Drives: Various BMW Join Date: Apr 2018 Location: US iTrader: (0)	Bump for people who missed this. __________________ Bimmercode best coding options (Basic and Advanced): https://g20.bimmerpost.com/forums/sh...5#post29807925
	Appreciate 0 Quote

05-21-2025, 01:21 PM	#12
RayCro328 New Member 5 Rep 23 Posts Drives: M340i Join Date: May 2025 Location: Croatia iTrader: (0)	Hello, what do you get if you activate B&W sound option on Harman Kardon system? Thanks
	Appreciate 0 Quote

05-21-2025, 01:23 PM	#13
gnolivos Captain 426 Rep 764 Posts Drives: Various BMW Join Date: Apr 2018 Location: US iTrader: (0)	[QUOTE=RayCro328;32095190]Hello, what do you get if you activate B&W sound option on Harman Kardon system? Thanks Slightly better sound and many sound stage options and equalizer. __________________ Bimmercode best coding options (Basic and Advanced): https://g20.bimmerpost.com/forums/sh...5#post29807925
	Appreciate 0 Quote

09-02-2025, 01:39 PM	#15
LT4Life Registered 5 Rep 3 Posts Drives: BMW 2023 G20 M340i Join Date: Aug 2025 Location: Middleburg, FL iTrader: (0)	following!
	Appreciate 0 Quote

09-06-2025, 03:22 AM	#16
Bronxg20 New Member 9 Rep 28 Posts Drives: BMW 330i Join Date: Sep 2023 Location: NYC iTrader: (0)	Enabled Speed limit info cushion. Gives me plus minus 5 cushion and configurable in iDrive even. This has to be changed in HU and also in BDC. 4 changes total VOFFSET from nicht_aktiv to GEN_2 (0x02) VOFFSET_LANGSAM from nicht_aktiv to GEN_2 (0x02) Do u mind explaining what is this for? Thanks I advance
	Appreciate 0 Quote

09-13-2025, 06:16 PM	#18
dhock_holiday Lieutenant 321 Rep 499 Posts Drives: M340i Join Date: Jul 2022 Location: Texas, USA iTrader: (0)	Anyone tested the auto close moonroof on the G20 LCI? Doesn’t seem to work for me
	Appreciate 1 JaminJ38.00 Quote