[HFW003]

Originally Posted by Tythefoodguy

Do you have a photo or two of the setup? And what kind of disk for your wheels do you run? L, A? Any help would be appreciated🙏🏽🙏🏽🙏🏽

I have posted pics previously, but any excuse

[g20beam]

Originally Posted by Tythefoodguy

Hey man, i know you posted this two years ago but wanted to know if you ended up having any future issue with this setup performance wise. Was the brake caliper in the front ever a problem? Thank you.

Currently still running this setup. Now upgraded to 374x36 front brake calipers and matching discs with no issue. Any bigger brakes will not fit though on 19” setup.

Performance wise.. I’m upgraded turbo atm with custom tune pushing ~400whp and lol the tires can’t hold the power when cornering. I’m running 255/35r19 squared.

[Tythefoodguy]

Originally Posted by g20beam

Currently still running this setup. Now upgraded to 374x36 front brake calipers and matching discs with no issue. Any bigger brakes will not fit though on 19” setup.

Performance wise.. I’m upgraded turbo atm with custom tune pushing ~400whp and lol the tires can’t hold the power when cornering. I’m running 255/35r19 squared.

Man I appreciate you getting back to me. Im going to run that 19X9.5+22 setup and get some Meisters. Just gotta figure out what kind of disk to get. L, A, etc.

[Ozzy88]

Hey
I'm planning on 20 inch rims for G20. For the width, I have thought 9 in the front and 10.5 in the back. And tires 245/35 and 275/30. What would be the most optimal numbers for the offsets without rubbing the back.
Probably around 25 in the front, but does it go below 40 in the back or do you have to stay between 40-45?

Would the same front tire (245/35) go with a 9.5 inch front with what kind of offset if the rims were 9.5 and 10.5?

Thanks for the advice

[a_ler]

Need advise on setup for my G26 rear wheel drive.
Currently i'm on Rohana 20x8.5 offset 25(F) 20x10 offset 33(R), Continental sports contact 7, 245/35/20(F) 275/30/20(R) but my rear poke seems too much. Ordered lowering springs and is on the way but from the way my rear poke, I am worried it will definatelly rub my fenders.
SHould i change tyre brand as the rim protector of these conti seems very thick?
Should i change tyre size to 265/30/20?

[felibon]

Originally Posted by lebaaron

Apex for the win -

$pec$:
. VS5-RS Staggered
. 19x9 ET25
. 19X10 ET38

Tire$:
. Khumo Ecsta PS71
245 40 19
275 35 19

Do you have adaptive M Suspension? I got the same setup but I'm concerned the front strut won't clear with 245/40 tires

[lebaaron]

Originally Posted by felibon

Do you have adaptive M Suspension? I got the same setup but I'm concerned the front strut won't clear with 245/40 tires

Hi

Yes I do and absolutely no issues.

[sistom]

What type of wheels are these?

Originally Posted by OffK

Not the best pics, its been too dang hot to get out and get some decent shots.

[felibon]

Anyone running 19 x 10 +35 in the rear? I want to know how much poke there will be? I just got some Curva concepts CFF70 and I'm afraid the rears are gonna poke too much for my liking.

[siegester]

Originally Posted by felibon

Anyone running 19 x 10 +35 in the rear? I want to know how much poke there will be? I just got some Curva concepts CFF70 and I'm afraid the rears are gonna poke too much for my liking.

A few posts up is someone with 10" +33 rear asking how to fix their excessive poke. Given it's 2mm diff, your poke will practically be the same. My 10" +44 wheel sits flush imo, but my 295 tires poke a bit. I will probably go 285 next time to clean up the look

[felibon]

Originally Posted by siegester

A few posts up is someone with 10" +33 rear asking how to fix their excessive poke. Given it's 2mm diff, your poke will practically be the same. My 10" +44 wheel sits flush imo, but my 295 tires poke a bit. I will probably go 285 next time to clean up the look

I agree and then there are a few people running 10 +38 or +35 but it doesn't seem to poke. I know camber accounts for part of it but they rarely include alignment settings in their posts. I went as close as I could to Apex but I got +35 instead of +38 which is what Apex recommends for a 10" wheel.

Curva has an M340i with my spec wheels and it seem flush maybe a mild poke but it's lowered and I'm sure camber is not stock.

[felibon]

Originally Posted by lebaaron

Hi

Yes I do and absolutely no issues.

I didn't see you reply! My bad. I ended up exchanging the tires and went front 245/35R19 and rear 285/30R19. It want to lower it a on Dinan springs so I figured I'll play it safe and give myself some room

[lebaaron]

Originally Posted by felibon

I didn't see you reply! My bad. I ended up exchanging the tires and went front 245/35R19 and rear 285/30R19. It want to lower it a on Dinan springs so I figured I'll play it safe and give myself some room

No worries, Let show us how it looks with the Dinan drop very curious to see!

[felibon]

Originally Posted by lebaaron

No worries, Let show us how it looks with the Dinan drop very curious to see!

I will post pictures! Unfortunately Dinan springs are in back order untill March 25th

[siegester]

Originally Posted by felibon

I agree and then there are a few people running 10 +38 or +35 but it doesn't seem to poke. I know camber accounts for part of it but they rarely include alignment settings in their posts. I went as close as I could to Apex but I got +35 instead of +38 which is what Apex recommends for a 10" wheel.

Curva has an M340i with my spec wheels and it seem flush maybe a mild poke but it's lowered and I'm sure camber is not stock.

Don't forget about tires. Stretched tires give the illusion of less poke. You can also run tires with less blocky sidewalls to help there too. That combined with some negative camber might get you the appearance of flush at the top of the wheel

[siegester]

Originally Posted by felibon

Do you have adaptive M Suspension? I got the same setup but I'm concerned the front strut won't clear with 245/40 tires

I have adaptive M on my m340i. I run 18x9 +28 with 265s up front. Very light contact with the strut when backing up, down a hill, at full lock. I'm going to run 255s next time and see if it goes away

[felibon]

Originally Posted by siegester

Don't forget about tires. Stretched tires give the illusion of less poke. You can also run tires with less blocky sidewalls to help there too. That combined with some negative camber might get you the appearance of flush at the top of the wheel

Yes, that was my plan but I'm also limited to specific tire sizes due to XDrive. I was gonna do 275/35 at the rear but that makes me go to a 245/40 at the front and I wanted a smaller sidewall. I know MPSS 4s run a little wide so hopefully it doesn't ruin my plans lol I also wanted to follow Curvas set up that is posted on their website. But I'm prepared to do some camber adjustments if it comes down to it.

[felibon]

Originally Posted by siegester

I have adaptive M on my m340i. I run 18x9 +28 with 265s up front. Very light contact with the strut when backing up, down a hill, at full lock. I'm going to run 255s next time and see if it goes away

Yeah from what I've gathered, 255 is the limit on this platform up front. We also have wider struts because of adaptive M. I had rubbing issues when I had my F80 M3 so I don't want to go through it again lol

[felibon]

Originally Posted by a_ler

Need advise on setup for my G26 rear wheel drive.
Currently i'm on Rohana 20x8.5 offset 25(F) 20x10 offset 33(R), Continental sports contact 7, 245/35/20(F) 275/30/20(R) but my rear poke seems too much. Ordered lowering springs and is on the way but from the way my rear poke, I am worried it will definatelly rub my fenders.
SHould i change tyre brand as the rim protector of these conti seems very thick?
Should i change tyre size to 265/30/20?

Your best option would be to follow what siegester said. You're already stretching at 275/30 so you're good there. You'll have to throw some negative camber and maybe lower it. Which is what I'll be doing if it comes to it. +33 on a 10" wide wheel is on the aggressive side.

[DjBaul]

Would this wheels fit my 2021 330i M package ?

Beyern Autobahn 19x9.5 (+39) 5x112

Thanks in advance!

[Tythefoodguy]

Originally Posted by g20beam

Currently still running this setup. Now upgraded to 374x36 front brake calipers and matching discs with no issue. Any bigger brakes will not fit though on 19” setup.

Performance wise.. I’m upgraded turbo atm with custom tune pushing ~400whp and lol the tires can’t hold the power when cornering. I’m running 255/35r19 squared.

Okay i understand. Is this an xdrive model? And also did you have to run camber on the back or did everything fit perfect? I dont plan on changing my suspension and i have an xdrive model. Thank you for your help.

[antdog]

Anyone have experience running 19x8.5 +45 in the front? G20