[TTG]

Originally Posted by njfoses

I should have been more specific meaning specifically here in the US, its done as an aesthetic mod.

Yup for sure.

[howiegu]

Originally Posted by TTG

If they are paying attention but having amber indicators eliminates that confusion

Not according to rest of the world. Try registering a car with NA set up outside of US and Canada, it will immediately fail inspection which is the reason why OP created this thread. Military personnel trying to register a US spec car in the UK which failed their MOT due to N. American set up.

Take a look at post #70

Yes, no idea what the parameters are for anything besides G20. There was a G22 specific discussion on this very same topic in the past, you might want to search for that. My guess is that "LICVERSIONDATA" has different values if you changed everything else to G22.

Upon a close look at my US G22 tail light operations, the curvature OLED strips only act as drl and tail lights; neither blinking as turn signals nor as brake lights. Only the upper corner LEDs function as both braking and turn signals.

I guess the EU G22 tail lights have additional components for turn signals which are missing in the US version. Too bad the RealOEM doesn't list parts for G22.

[krazyed]

Originally Posted by TTG

After almost 3 years, I figured this out!!!!

Couple of plans got cancelled tonight and I found myself messing with the car and I got everything to work via Bimmer Code thanks to all who contributed to this thread.

Here is what I have done based on all the data that I have gathered through this thread. Full disclosure: Do this at your own risk!!!!

This is what worked for me.

Make sure that you have the latest version of Bimmer Code installed on your device.

Body Domain Control Menu, Expert mode change everything below as stated previously.

LIC_FEATURE_14 enable -> disable
LIC_NIVEAU_OVVERRIDE_INDEX G20_US_code2 -> G22_ECE_code2
LIC_NIVEAU_OVVERRIDE_DATA_0 G20_US_code2 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_INDEX G20_US_code1 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_DATA G20_US_code1 -> G20_ECE_code1
LIC_EDGE_CUTTER_RULE_ASSIGNMENT G20_US_code -> G20_ECE_code

And then go ahead and execute the coding.

Now this is the step that we all have been missing.

Once you are done with above coding, do not touch anything and go back to the expert mode and pull up

LICVERSIONDATA

Bimmer code has different values added to this list after you code above which were not present before or if you do all the coding at once. Based on the actual codes that larrylam646 & moproblems provided, I scrolled through the entire list and found values that matched their data around 98%. Following values were provided for by Larry and Moproblems:

71,14,09,02,08,44,06,4F,00,0A,14,02,B4,C8,02,F0,0F ,3E,D4,2C,27,32,03,03,07,02,28,78,3F,EF,16,0C,04,0 A,27,0F,77

I studied the entire list carefully and what I ended up choosing was the only set of data that started with 71, 14 and 09 which is identified as UNKNOWN_28 in my case (based on your vehicle's options your UNKNOWN number might be different) (Pay attention to the values!). The rest of the data on Bimmer code under any of the other UNKNOWNS were not even a close match and there was only one set of data that started with 71 in my case.


See below pic for UNKNOWN_28 for the values I selected.



Go ahead and execute coding again and then you are DONE!

Full set of Turn Signals that are separated from brake lights just as BMW designed!

I tested everything that I can while in the garage and everything works just as it would on a Rest of the Word (ROW) spec cars.

I will have to double check emergency braking feature and some other stuff when I drive the car tomorrow but brake lights, back up lights, turn signals, DRLs, parking lights (all), parking lights left & right & etc work perfectly with no hyper flashing on turn signals!!!!

Time to order some beautiful AMBER tail lights now

Let me know if you have any questions and thanks to all who contributed to this thread. I might create a separate thread to document this whole thing so that other folks don't have to read through this whole thing.

Let me know if you have any questions.

PS: My car's options are listed in my signature per the option codes BMW offered at the time of ordering. I do have Laser Lights which I don't know makes any difference as far as coding is concerned.

I've been wanting to do this for so long! Thanks everyone for the information! It's working!

https://drive.google.com/file/d/1DXS...w?usp=drivesdk

[ATG_]

Two Rear fog lights: UK and EU

[Drunkm0nk3y]

Question on this.

I looked up the values and my m340i ( 6.6.2022 production ) has a different setting here


LIC_NIVEAU_OVVERRIDE_INDEX G20_US_code2 -> G22_ECE_code2

it reads G20_xx_xx_G80_US_Code1 . The xx are the different chassis codes ( forgot to take a screenshot) . There is the same line in ECE_Code1 along with ECE_Code2.

not sure what to pick.

[TTG]

Originally Posted by Drunkm0nk3y

Question on this.

I looked up the values and my m340i ( 6.6.2022 production ) has a different setting here


LIC_NIVEAU_OVVERRIDE_INDEX G20_US_code2 -> G22_ECE_code2

it reads G20_xx_xx_G80_US_Code1 . The xx are the different chassis codes ( forgot to take a screenshot) . There is the same line in ECE_Code1 along with ECE_Code2.

not sure what to pick.

Give ECE_Code 2 a try and let us know what happens.

[Vmaxx]

Originally Posted by TTG

No, but you can code that separately.

How do you code brake force flashing via bimmercode?

[Vmaxx]

Originally Posted by TTG

Give ECE_Code 2 a try and let us know what happens.

I don’t have LIC_NIVEAU_OVVERRIDE_INDEX, but I have LIC_LCI_NIVEAU_OVVERRIDE_INDEX and that option is not in there. I have a 2021.

[Neles]

Originally Posted by TTG

After almost 3 years, I figured this out!!!!

Couple of plans got cancelled tonight and I found myself messing with the car and I got everything to work via Bimmer Code thanks to all who contributed to this thread.

Here is what I have done based on all the data that I have gathered through this thread. Full disclosure: Do this at your own risk!!!!

This is what worked for me.

Make sure that you have the latest version of Bimmer Code installed on your device.

Body Domain Control Menu, Expert mode change everything below as stated previously.

LIC_FEATURE_14 enable -> disable
LIC_NIVEAU_OVVERRIDE_INDEX G20_US_code2 -> G22_ECE_code2
LIC_NIVEAU_OVVERRIDE_DATA_0 G20_US_code2 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_INDEX G20_US_code1 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_DATA G20_US_code1 -> G20_ECE_code1
LIC_EDGE_CUTTER_RULE_ASSIGNMENT G20_US_code -> G20_ECE_code

And then go ahead and execute the coding.

Now this is the step that we all have been missing.

Once you are done with above coding, do not touch anything and go back to the expert mode and pull up

LICVERSIONDATA

Bimmer code has different values added to this list after you code above which were not present before or if you do all the coding at once. Based on the actual codes that larrylam646 & moproblems provided, I scrolled through the entire list and found values that matched their data around 98%. Following values were provided for by Larry and Moproblems:

71,14,09,02,08,44,06,4F,00,0A,14,02,B4,C8,02,F0,0F ,3E,D4,2C,27,32,03,03,07,02,28,78,3F,EF,16,0C,04,0 A,27,0F,77

I studied the entire list carefully and what I ended up choosing was the only set of data that started with 71, 14 and 09 which is identified as UNKNOWN_28 in my case (based on your vehicle's options your UNKNOWN number might be different) (Pay attention to the values!). The rest of the data on Bimmer code under any of the other UNKNOWNS were not even a close match and there was only one set of data that started with 71 in my case.


See below pic for UNKNOWN_28 for the values I selected.


Go ahead and execute coding again and then you are DONE!

Full set of Turn Signals that are separated from brake lights just as BMW designed!

I tested everything that I can while in the garage and everything works just as it would on a Rest of the Word (ROW) spec cars.

I will have to double check emergency braking feature and some other stuff when I drive the car tomorrow but brake lights, back up lights, turn signals, DRLs, parking lights (all), parking lights left & right & etc work perfectly with no hyper flashing on turn signals!!!!

Time to order some beautiful AMBER tail lights now

Let me know if you have any questions and thanks to all who contributed to this thread. I might create a separate thread to document this whole thing so that other folks don't have to read through this whole thing.

Let me know if you have any questions.

PS: My car's options are listed in my signature per the option codes BMW offered at the time of ordering. I do have Laser Lights which I don't know makes any difference as far as coding is concerned.

Bro, I just successfully did this on my G80. Works great! Your instructions were spot on including the UNKNOWN_28 part. Time to get some Euro tails!

Also, I noticed I now have the "Euro flashers" on my Laser Headlights. This allows the front flashers to blink while DRLs are on.

[TTG]

Originally Posted by Neles

Bro, I just successfully did this on my G80. Works great! Your instructions were spot on including the UNKNOWN_28 part. Time to get some Euro tails!

Also, I noticed I now have the "Euro flashers" on my Laser Headlights. This allows the front flashers to blink while DRLs are on.

Glad to hear you got it work. My Euro tails arrived last week and of course I immediately installed them.

I have to go check but I am pretty sure, front DLRs never dimmed on my car while the flashers were on. I think that is how they are designed to function worldwide.

[Neles]

Originally Posted by TTG

Glad to hear you got it work. My Euro tails arrived last week and of course I immediately installed them.

I have to go check but I am pretty sure, front DLRs never dimmed on my car while the flashers were on. I think that is how they are designed to function worldwide.

Where did you order the tails from?

[TTG]

Originally Posted by Neles

Where did you order the tails from?

I got them from a seller "premium-components" off of eBay.uk There are several sets available both on German and UK Ebays.

[TTG]

Originally Posted by Vmaxx

How do you code brake force flashing via bimmercode?

Search Bimmer Code Expert Mode Cheat Sheet Thread, its discussed there.

[njfoses]

Originally Posted by TTG

I got them from a seller "premium-components" off of eBay.uk There are several sets available both on German and UK Ebays.

Can you share any pics/videos of the new tails?

[TTG]

Originally Posted by njfoses

Can you share any pics/videos of the new tails?

Folks have already posted videos on this thread. Mine look just the same.

[bimercode]

Hi iwant to coding g20 2022
REAR LIGHT BARS FOR TURN SIGNALS

Just the led. Withuot the blinker

[bimercode]

Originally Posted by TTG

Folks have already posted videos on this thread. Mine look just the same.

Hi iwant to coding g20 2022
REAR LIGHT BARS FOR TURN SIGNALS

Just the led. Withuot the blinker

[pawli981]

Hi, I have a g20 from 2019. I want to remake the rear lights, but I don't have options like you :/
I cant find "LIC_NIBEAU)OVERRIDE_DATA 0"
But I have this option " LIC_LCI_NIBEAU)OVERRIDE_DATA 0" is it the same?
I don't see any options except LIC_FRATURE_14

Originally Posted by TTG

After almost 3 years, I figured this out!!!!

Couple of plans got cancelled tonight and I found myself messing with the car and I got everything to work via Bimmer Code thanks to all who contributed to this thread.

Here is what I have done based on all the data that I have gathered through this thread. Full disclosure: Do this at your own risk!!!!

This is what worked for me.

Make sure that you have the latest version of Bimmer Code installed on your device.

Body Domain Control Menu, Expert mode change everything below as stated previously.

LIC_FEATURE_14 enable -> disable
LIC_NIVEAU_OVVERRIDE_INDEX G20_US_code2 -> G22_ECE_code2
LIC_NIVEAU_OVVERRIDE_DATA_0 G20_US_code2 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_INDEX G20_US_code1 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_DATA G20_US_code1 -> G20_ECE_code1
LIC_EDGE_CUTTER_RULE_ASSIGNMENT G20_US_code -> G20_ECE_code

And then go ahead and execute the coding.

Now this is the step that we all have been missing.

Once you are done with above coding, do not touch anything and go back to the expert mode and pull up

LICVERSIONDATA

Bimmer code has different values added to this list after you code above which were not present before or if you do all the coding at once. Based on the actual codes that larrylam646 & moproblems provided, I scrolled through the entire list and found values that matched their data around 98%. Following values were provided for by Larry and Moproblems:

71,14,09,02,08,44,06,4F,00,0A,14,02,B4,C8,02,F0,0F ,3E,D4,2C,27,32,03,03,07,02,28,78,3F,EF,16,0C,04,0 A,27,0F,77

I studied the entire list carefully and what I ended up choosing was the only set of data that started with 71, 14 and 09 which is identified as UNKNOWN_28 in my case (based on your vehicle's options your UNKNOWN number might be different) (Pay attention to the values!). The rest of the data on Bimmer code under any of the other UNKNOWNS were not even a close match and there was only one set of data that started with 71 in my case.


See below pic for UNKNOWN_28 for the values I selected.



Go ahead and execute coding again and then you are DONE!

Full set of Turn Signals that are separated from brake lights just as BMW designed!

I tested everything that I can while in the garage and everything works just as it would on a Rest of the Word (ROW) spec cars.

I will have to double check emergency braking feature and some other stuff when I drive the car tomorrow but brake lights, back up lights, turn signals, DRLs, parking lights (all), parking lights left & right & etc work perfectly with no hyper flashing on turn signals!!!!

Time to order some beautiful AMBER tail lights now

Let me know if you have any questions and thanks to all who contributed to this thread. I might create a separate thread to document this whole thing so that other folks don't have to read through this whole thing.

Let me know if you have any questions.

PS: My car's options are listed in my signature per the option codes BMW offered at the time of ordering. I do have Laser Lights which I don't know makes any difference as far as coding is concerned.

[TTG]

Originally Posted by pawli981

Hi, I have a g20 from 2019. I want to remake the rear lights, but I don't have options like you :/
I cant find "LIC_NIBEAU)OVERRIDE_DATA 0"
But I have this option " LIC_LCI_NIBEAU)OVERRIDE_DATA 0" is it the same?
I don't see any options except LIC_FRATURE_14

If you are from Poland, your car is already European spec with amber turn signals. None of this will apply to you unless you have a N. American spec car that you are trying to convert.

My car is July 2019 built, what is your build date?

[michael.bramblett]

Originally Posted by TTG

If you are from Poland, your car is already European spec with amber turn signals. None of this will apply to you unless you have a N. American spec car that you are trying to convert.

My car is July 2019 built, what is your build date?

I'm having the same issue. 2019 NAR. So weird… may have to go the bimmerutility route.

[michael.bramblett]

Originally Posted by Vmaxx

I don’t have LIC_NIVEAU_OVVERRIDE_INDEX, but I have LIC_LCI_NIVEAU_OVVERRIDE_INDEX and that option is not in there. I have a 2021.

I have the exact same options as you on my 2019. Did you ever figure yours out?

[michaelmkr]

if necessary, I can remotely code all lamps euro style